c# - Trace.Assert 没有中断，也没有显示消息框

标签 c# wpf assert

我有一个 WPF 应用程序，我在其中在 Canvas 上四处移动数据。 当我疯狂地尝试用鼠标移动数据时，问题就出现了。

这是操作的顺序:

  • Canvas 上的鼠标移动被触发
  • 在 MouseMove 中，我更改了一些数据
  • Trace.Assert 失败。调试器不会中断，消息框也不会中断
  • 触发了另一个 MouseMove
  • 数据又改了
  • 由于集合中的重入检查而抛出异常。调试器在那里中断。断言消息框从未显示。

这里最大的问题是我可以回到断言，但它不是断言失败时的数据，而是最后修改的数据......所以基本上我无法正确调试。

这是堆栈跟踪，从第一个 MouseMove 开始(注意 ShowMessageBoxAssert 以及它仍在继续的事实...):

  .Models.FCurve.MoveKey(int keyIndex = 3, double keyTime = 1182.0) Line 199 C#
  .Models.FCurve.KeyTimeChanged(Models.FCurveKey timeChangeKey = {Models.FCurveKey}) Line 186 + 0x2d bytes C#
  .Models.FCurve.AddKeyToArray.AnonymousMethod(object sender = {Models.FCurveKey}, System.EventArgs args = {System.EventArgs}) Line 163 + 0x11 bytes C#
  [Native to Managed Transition] 
  [Managed to Native Transition] 
  .Models.FCurveKey.OnTimeChanged() Line 45 + 0x14 bytes C#
  .Models.FCurveKey..ctor.AnonymousMethod(object sender = {FCurveEditorTestApp.Impl.FCurveKeyImpl}, System.EventArgs args = {System.EventArgs}) Line 18 + 0x8 bytes C#
  [Native to Managed Transition] 
  [Managed to Native Transition] 
  FCurveEditorTestApp.exe!FCurveEditorTestApp.Impl.FCurveKeyImpl.OnTimeChanged() Line 43 + 0x14 bytes C#
  FCurveEditorTestApp.exe!FCurveEditorTestApp.Impl.FCurveKeyImpl.Time.set(double value = 1182.0) Line 34 + 0x8 bytes C#
  .Models.FCurveKey.Time.set(double value = 1182.0) Line 36 + 0x1b bytes C#
  .ViewModels.CurveKeyViewModel.X.set(double value = 1182.0) Line 32 + 0x2b bytes C#
  .ViewModels.CurveAreaViewModel.MoveSelectedItem.AnonymousMethod(ViewModels.CurveKeyViewModel key = {ViewModels.CurveKeyViewModel}) Line 127 + 0x2d bytes C#
  Collections.CollectionHelper.ForEach(System.Collections.Generic.IEnumerable source = {System.Linq.Enumerable.OfTypeIterator}, System.Action action = {Method = {Void b__8(ViewModels.CurveKeyViewModel)}}) Line 31 + 0xe bytes C#
  .ViewModels.CurveAreaViewModel.MoveSelectedItem(double deltaX = 693.0, double deltaY = 35.0) Line 126 + 0x63 bytes C#
  .Views.CurveAreaView._AreaCanvas_MouseMove(object sender = {System.Windows.Controls.Canvas}, System.Windows.Input.MouseEventArgs e = {System.Windows.Input.MouseEventArgs}) Line 195 + 0x2d bytes C#
  PresentationCore.dll!System.Windows.Input.MouseEventArgs.InvokeEventHandler(System.Delegate genericHandler, object genericTarget) + 0x34 bytes 
  PresentationCore.dll!System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate handler, object target) + 0x27 bytes 
  PresentationCore.dll!System.Windows.RoutedEventHandlerInfo.InvokeHandler(object target, System.Windows.RoutedEventArgs routedEventArgs) + 0x3e bytes 
  PresentationCore.dll!System.Windows.EventRoute.InvokeHandlersImpl(object source = {System.Windows.Controls.Canvas}, System.Windows.RoutedEventArgs args = {System.Windows.Input.MouseEventArgs}, bool reRaised = false) + 0x1bf bytes 
  PresentationCore.dll!System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject sender = {System.Windows.Controls.Canvas}, System.Windows.RoutedEventArgs args = {System.Windows.Input.MouseEventArgs}) + 0x79 bytes 
  PresentationCore.dll!System.Windows.UIElement.RaiseEvent(System.Windows.RoutedEventArgs args = {System.Windows.Input.MouseEventArgs}, bool trusted) + 0x35 bytes 
  PresentationCore.dll!System.Windows.Input.InputManager.ProcessStagingArea() + 0x311 bytes 
  PresentationCore.dll!System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs input) + 0x42 bytes 
  PresentationCore.dll!System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport inputReport) + 0x62 bytes 
  PresentationCore.dll!System.Windows.Interop.HwndMouseInputProvider.ReportInput(System.IntPtr hwnd, System.Windows.Input.InputMode mode, int timestamp, System.Windows.Input.RawMouseActions actions, int x, int y, int wheel) + 0x2e2 bytes 
  PresentationCore.dll!System.Windows.Interop.HwndMouseInputProvider.FilterMessage(System.IntPtr hwnd = 2628604, int msg = 512, System.IntPtr wParam = 1, System.IntPtr lParam = 30409804, ref bool handled = false) + 0x22b bytes 
  PresentationCore.dll!System.Windows.Interop.HwndSource.InputFilterMessage(System.IntPtr hwnd = 2628604, int msg = 512, System.IntPtr wParam = 1, System.IntPtr lParam = 30409804, ref bool handled = false) + 0x75 bytes 
  WindowsBase.dll!MS.Win32.HwndWrapper.WndProc(System.IntPtr hwnd = 2628604, int msg = 512, System.IntPtr wParam = 1, System.IntPtr lParam = 30409804, ref bool handled = false) + 0xbe bytes 
  WindowsBase.dll!MS.Win32.HwndSubclass.DispatcherCallbackOperation(object o) + 0x7a bytes 
  WindowsBase.dll!System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate callback = {Method = {System.Object DispatcherCallbackOperation(System.Object)}}, object args = {MS.Win32.HwndSubclass.DispatcherOperationCallbackParameter}, bool isSingleParameter = true) + 0x8a bytes 
  WindowsBase.dll!System.Windows.Threading.ExceptionWrapper.TryCatchWhen(object source = {System.Windows.Threading.Dispatcher}, System.Delegate callback, object args, bool isSingleParameter, System.Delegate catchHandler = null) + 0x4a bytes 
  WindowsBase.dll!System.Windows.Threading.Dispatcher.WrappedInvoke(System.Delegate callback, object args, bool isSingleParameter, System.Delegate catchHandler) + 0x44 bytes 
  WindowsBase.dll!System.Windows.Threading.Dispatcher.InvokeImpl(System.Windows.Threading.DispatcherPriority priority, System.TimeSpan timeout, System.Delegate method, object args, bool isSingleParameter) + 0x91 bytes 
  WindowsBase.dll!System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority priority, System.Delegate method, object arg) + 0x40 bytes 
  WindowsBase.dll!MS.Win32.HwndSubclass.SubclassWndProc(System.IntPtr hwnd = 2628604, int msg = 512, System.IntPtr wParam = 1, System.IntPtr lParam = 30409804) + 0xdc bytes 
  [Native to Managed Transition] 
  [Managed to Native Transition] 
  System.dll!System.Diagnostics.AssertWrapper.ShowMessageBoxAssert(string stackTrace, string message, string detailMessage) + 0x103 bytes 
  System.dll!System.Diagnostics.DefaultTraceListener.Fail(string message, string detailMessage) + 0xb2 bytes 
  System.dll!System.Diagnostics.DefaultTraceListener.Fail(string message) + 0xa bytes 
  System.dll!System.Diagnostics.TraceInternal.Fail(string message = "") + 0xb6 bytes 
  System.dll!System.Diagnostics.Trace.Assert(bool condition) + 0x1c bytes 
  .ViewModels.CurvePathViewModel.CurvePathViewModel(Models.FCurveKey startKey = {Models.FCurveKey}, Models.FCurveKey endKey = {Models.FCurveKey}, ViewModels.IInterpolationProvider interpolatorProvider = {ViewModels.InterpolationInfoProvider}) Line 29 + 0x4e bytes C#
  .ViewModels.CurvePathViewModel.CurvePathViewModel(ViewModels.CurveKeyViewModel startKey = {ViewModels.CurveKeyViewModel}, ViewModels.CurveKeyViewModel endKey = {ViewModels.CurveKeyViewModel}, ViewModels.IInterpolationProvider interpolatorProvider = {ViewModels.InterpolationInfoProvider}) Line 20 + 0x81 bytes C#
  .ViewModels.CurveViewModel.UpdateSegmentForKey(ViewModels.CurveKeyViewModel key = {ViewModels.CurveKeyViewModel}) Line 215 + 0x41 bytes C#
  .ViewModels.CurveViewModel.KeyViewModelsChanged(object sender = Count = 13, System.Collections.Specialized.NotifyCollectionChangedEventArgs e = {System.Collections.Specialized.NotifyCollectionChangedEventArgs}) Line 187 + 0x30 bytes C#
  [Native to Managed Transition] 
  [Managed to Native Transition] 
  WindowsBase.dll!System.Collections.ObjectModel.ObservableCollection.OnCollectionChanged(System.Collections.Specialized.NotifyCollectionChangedEventArgs e) + 0x50 bytes 
  WindowsBase.dll!System.Collections.ObjectModel.ObservableCollection.OnCollectionChanged(System.Collections.Specialized.NotifyCollectionChangedAction action, object item, int index, int oldIndex) + 0x34 bytes 
  WindowsBase.dll!System.Collections.ObjectModel.ObservableCollection.MoveItem(int oldIndex, int newIndex) + 0x6f bytes 
  WindowsBase.dll!System.Collections.ObjectModel.ObservableCollection.Move(int oldIndex, int newIndex) + 0xe bytes 
  Collections.CollectionSynchronizer._SourceList_CollectionChanged(object sender = Count = 13, System.Collections.Specialized.NotifyCollectionChangedEventArgs e = {System.Collections.Specialized.NotifyCollectionChangedEventArgs}) Line 239 + 0x45 bytes C#
  [Native to Managed Transition] 
  [Managed to Native Transition] 
  WindowsBase.dll!System.Collections.ObjectModel.ReadOnlyObservableCollection.OnCollectionChanged(System.Collections.Specialized.NotifyCollectionChangedEventArgs args) + 0x1d bytes 
  WindowsBase.dll!System.Collections.ObjectModel.ReadOnlyObservableCollection.HandleCollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e) + 0xe bytes 
  [Native to Managed Transition] 
  [Managed to Native Transition] 
  WindowsBase.dll!System.Collections.ObjectModel.ObservableCollection.OnCollectionChanged(System.Collections.Specialized.NotifyCollectionChangedEventArgs e) + 0x50 bytes 
  WindowsBase.dll!System.Collections.ObjectModel.ObservableCollection.OnCollectionChanged(System.Collections.Specialized.NotifyCollectionChangedAction action, object item, int index, int oldIndex) + 0x34 bytes 
  WindowsBase.dll!System.Collections.ObjectModel.ObservableCollection.MoveItem(int oldIndex, int newIndex) + 0x6f bytes 
  WindowsBase.dll!System.Collections.ObjectModel.ObservableCollection.Move(int oldIndex, int newIndex) + 0xe bytes 
  .Models.FCurve.MoveKey(int keyIndex = 1, double keyTime = 489.0) Line 199 + 0x19 bytes C#
  .Models.FCurve.KeyTimeChanged(Models.FCurveKey timeChangeKey = {Models.FCurveKey}) Line 186 + 0x2d bytes C#
  .Models.FCurve.AddKeyToArray.AnonymousMethod(object sender = {Models.FCurveKey}, System.EventArgs args = {System.EventArgs}) Line 163 + 0x11 bytes C#
  [Native to Managed Transition] 
  [Managed to Native Transition] 
  .Models.FCurveKey.OnTimeChanged() Line 45 + 0x14 bytes C#
  .Models.FCurveKey..ctor.AnonymousMethod(object sender = {FCurveEditorTestApp.Impl.FCurveKeyImpl}, System.EventArgs args = {System.EventArgs}) Line 18 + 0x8 bytes C#
  [Native to Managed Transition] 
  [Managed to Native Transition] 
  FCurveEditorTestApp.exe!FCurveEditorTestApp.Impl.FCurveKeyImpl.OnTimeChanged() Line 43 + 0x14 bytes C#
  FCurveEditorTestApp.exe!FCurveEditorTestApp.Impl.FCurveKeyImpl.Time.set(double value = 489.0) Line 34 + 0x8 bytes C#
  .Models.FCurveKey.Time.set(double value = 489.0) Line 36 + 0x1b bytes C#
  .ViewModels.CurveKeyViewModel.X.set(double value = 489.0) Line 32 + 0x2b bytes C#
  .ViewModels.CurveAreaViewModel.MoveSelectedItem.AnonymousMethod(ViewModels.CurveKeyViewModel key = {ViewModels.CurveKeyViewModel}) Line 127 + 0x2d bytes C#
  Collections.CollectionHelper.ForEach(System.Collections.Generic.IEnumerable source = {System.Linq.Enumerable.OfTypeIterator}, System.Action action = {Method = {Void b__8(ViewModels.CurveKeyViewModel)}}) Line 31 + 0xe bytes C#
  .ViewModels.CurveAreaViewModel.MoveSelectedItem(double deltaX = 82.0, double deltaY = -9.0) Line 126 + 0x63 bytes C#
  Views.CurveAreaView._AreaCanvas_MouseMove(object sender = {System.Windows.Controls.Canvas}, System.Windows.Input.MouseEventArgs e = {System.Windows.Input.MouseEventArgs}) Line 195 + 0x2d bytes C#

问题是:为什么会发生这种情况，我应该怎么做才能让它在断言时中断？

我想过使用异常，也许是为了调试，但它确实是我需要的断言。我也在考虑我所有其他的断言，而不需要总是将它们转换为异常以进行调试......

最佳答案

您可以通过编写自己的 TraceListener 在 AppDomain 范围内(如果您的应用程序只有一个 AppDomain，则在应用程序范围内)执行此操作.

首先创建一个类库项目MyTraceListeners.dll包含 ExceptionTraceListener类:

public class ExceptionTraceListener : TraceListener
{
  public override void Write(string message)
  {
    // Do nothing
  }
  public override void Fail(string message)
  {
    Debugger.Break();  // or if you prefer, throw new Exception(...)
  }
  public override void Fail(string message, string detailMessage)
  {
    Debugger.Break();  // or if you prefer, throw new Exception(...)
  }
}

现在您可以注册这个 TraceListener在您的应用程序中 .config以通常的方式归档:

<configuration>
  ...
  <system.diagnostics>
    ...
    <trace>
      <listeners>
        <clear />
        <add name="myListener" type="ExceptionTraceListener, MyTraceListeners" />
      </listeners>
    </trace>
  </system.diagnostics>
</configuration>

当您使用这些 .config 文件条目运行您的应用程序时，调试器将在每次失败的断言时立即中断。

另请注意 <clear />在此配置文件中清除所有默认值 TraceListeners列于 Machine.config .这很重要，因为默认 TraceListener s 会比你先接到电话，但仍会弹出 MessageBox .

关于c# - Trace.Assert 没有中断，也没有显示消息框，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/1757133/

上一篇：c# - 如何自定义 ToolStripTextBox 的呈现？

下一篇：c# - 100%万无一失的c# ftp文件传输代码(如果可能的话可以进行交易)

相关文章：

c# - 如果文件已存在于 c# 中，则增加文件名

wpf - 增加StrokeThickness，但保持Path的尺寸

c# - 在 WPF C# 中处理两个 UI 线程

wpf - 您在 WPF 工作中使用了哪些设计模式，您喜欢哪种设计模式？

c - 为什么这段代码表现不一致？

c# - 使用 Xamarin 连接到远程 MySQL

c# - 如何在没有 CopyFile 或 CopyFileEx 的情况下在 Windows 上复制大文件？

c# - 如何使用 C# 代码而不是 XAML 启用窗口镶边？

c# - 为什么 Assert.AreEqual(T obj1, Tobj2) 会因相同的字节数组而失败

forms - Symfony 4 -- 表单最小最大验证

©2024 IT工具网  联系我们