c - 套接字连接失败，telnet OK

Question

我的问题是我无法通过套接字(windows xp 和 windows7)连接两个组件，尽管用套接字创建的服务器正在监听并且我可以远程登录它。然后它接收信息并执行应该做的事情，但是如果我运行相应的套接字客户端，我会收到错误 10061。此外，我在防火墙后面 - 这两个组件在我的 LAN 中运行，Windows 防火墙已关闭，

comp1 [客户端]: 192.168.1.2 端口 12345

comp2 [服务器]: 192.168.1.5 端口 12345

路由器:192.168.1.1

也许端口转发会有帮助？但对我来说最重要的是回答为什么在 telnet 工作正常时套接字会失败。

客户:

 int main(){
        // Initialize Winsock.
        WSADATA wsaData;
        int iResult = WSAStartup(MAKEWORD(2,2), &wsaData);
        if (iResult != NO_ERROR)
             printf("Client: Error at WSAStartup().\n");
        else
             printf("Client: WSAStartup() is OK.\n");
        // Create a socket.
        SOCKET m_socket;
        m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);

        if (m_socket == INVALID_SOCKET){
            printf("Client: socket() - Error at socket(): %ld\n", WSAGetLastError());
            WSACleanup();
            return 7;
        }else
           printf("Client: socket() is OK.\n");

        // Connect to a server.
        sockaddr_in clientService;

        clientService.sin_family = AF_INET;
        //clientService.sin_addr.s_addr = inet_addr("77.64.240.156");
        clientService.sin_addr.s_addr = inet_addr("192.168.1.5");
        //clientService.sin_addr.s_addr = inet_addr("87.207.222.5");
        clientService.sin_port = htons(12345);

        if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR){
            printf("Client: connect() - Failed to connect.\n");
            wprintf(L"connect function failed with error: %ld\n", WSAGetLastError());
            iResult = closesocket(m_socket);
            if (iResult == SOCKET_ERROR)
            wprintf(L"closesocket function failed with error: %ld\n", WSAGetLastError());
            WSACleanup();
            return 6;
        }

        // Send and receive data
        int bytesSent;
        int bytesRecv = SOCKET_ERROR;
        // Be careful with the array bound, provide some checking mechanism
        char sendbuf[200] = "Client: Sending some test string to server...";
        char recvbuf[200] = "";

        bytesSent = send(m_socket, sendbuf, strlen(sendbuf), 0);
        printf("Client: send() - Bytes Sent: %ld\n", bytesSent);

        while(bytesRecv == SOCKET_ERROR){
            bytesRecv = recv(m_socket, recvbuf, 32, 0);
            if (bytesRecv == 0 || bytesRecv == WSAECONNRESET){
                printf("Client: Connection Closed.\n");
                break;
            }else
                printf("Client: recv() is OK.\n");

            if (bytesRecv < 0)
                return 0;
            else
                printf("Client: Bytes received - %ld.\n", bytesRecv);
        }
        system("pause");
        return 0;
    }

服务器:

int main(){
WORD wVersionRequested;
WSADATA wsaData={0};
int wsaerr;

// Using MAKEWORD macro, Winsock version request 2.2
wVersionRequested = MAKEWORD(2, 2);
wsaerr = WSAStartup(wVersionRequested, &wsaData);
if (wsaerr != 0){
    /* Tell the user that we could not find a usable WinSock DLL.*/
    printf("Server: The Winsock dll not found!\n");
    return 0;
}else{
       printf("Server: The Winsock dll found!\n");
       printf("Server: The status: %s.\n", wsaData.szSystemStatus);
}

/* Confirm that the WinSock DLL supports 2.2.*/
/* Note that if the DLL supports versions greater    */
/* than 2.2 in addition to 2.2, it will still return */
/* 2.2 in wVersion since that is the version we      */
/* requested.                                        */
if (LOBYTE(wsaData.wVersion) != 2 || HIBYTE(wsaData.wVersion) != 2 ){
/* Tell the user that we could not find a usable WinSock DLL.*/
printf("Server: The dll do not support the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion));
       WSACleanup();
       return 0;
}else{
       printf("Server: The dll supports the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion));
       printf("Server: The highest version this dll can support: %u.%u\n", LOBYTE(wsaData.wHighVersion), HIBYTE(wsaData.wHighVersion));
}
//////////Create a socket////////////////////////
//Create a SOCKET object called m_socket.
SOCKET m_socket;
// Call the socket function and return its value to the m_socket variable.
// For this application, use the Internet address family, streaming sockets, and the TCP/IP protocol.
// using AF_INET family, TCP socket type and protocol of the AF_INET - IPv4
m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);

// Check for errors to ensure that the socket is a valid socket.
if (m_socket == INVALID_SOCKET){
    printf("Server: Error at socket(): %ld\n", WSAGetLastError());
    WSACleanup();
    //return 0;
}else{
    printf("Server: socket() is OK!\n");
}

////////////////bind//////////////////////////////
// Create a sockaddr_in object and set its values.
sockaddr_in service;

// AF_INET is the Internet address family.
service.sin_family = AF_INET;
// "127.0.0.1" is the local IP address to which the socket will be bound.
service.sin_addr.s_addr = htons(INADDR_ANY);//inet_addr("127.0.0.1");//htons(INADDR_ANY); //inet_addr("192.168.1.2");
// 55555 is the port number to which the socket will be bound.
// using the htons for big-endian
service.sin_port = htons(12345);

// Call the bind function, passing the created socket and the sockaddr_in structure as parameters.
// Check for general errors.
if (bind(m_socket, (SOCKADDR*)&service, sizeof(service)) == SOCKET_ERROR){
    printf("Server: bind() failed: %ld.\n", WSAGetLastError());
    closesocket(m_socket);
    //return 0;
}else{
    printf("Server: bind() is OK!\n");
}
// Call the listen function, passing the created socket and the maximum number of allowed
// connections to accept as parameters. Check for general errors.
if (listen(m_socket, 1) == SOCKET_ERROR)
       printf("Server: listen(): Error listening on socket %ld.\n", WSAGetLastError());
else{
    printf("Server: listen() is OK, I'm waiting for connections...\n");
}

// Create a temporary SOCKET object called AcceptSocket for accepting connections.
SOCKET AcceptSocket;

// Create a continuous loop that checks for connections requests. If a connection
// request occurs, call the accept function to handle the request.
printf("Server: Waiting for a client to connect...\n");
printf("***Hint: Server is ready...run your client program...***\n");
// Do some verification...
while (1){
    AcceptSocket = SOCKET_ERROR;

      while (AcceptSocket == SOCKET_ERROR){
        AcceptSocket = accept(m_socket, NULL, NULL);
       }
   // else, accept the connection...  note: now it is wrong implementation !!!!!!!! !! !! (only 1 char)
   // When the client connection has been accepted, transfer control from the
   // temporary socket to the original socket and stop checking for new connections.
    printf("Server: Client Connected! Mammamija. \n");
    m_socket = AcceptSocket;
    char recvBuf[200]="";
    char * rc=recvBuf;
    int bytesRecv=recv(m_socket,recvBuf,64,0);

    if(bytesRecv==0 || bytesRecv==WSAECONNRESET){
        cout<<"server: connection closed.\n";
        }else{
            cout<<"server: recv() is OK.\n";
            if(bytesRecv<0){
                return 0;
                }else{
                    printf("server: bytes received: %ld.\n",recvBuf);
            }
    }

客户端的输出:

PS C:\Users\Piter\documents\vs2010\projects\client_socket\debug> ./client_socket.exe
Client: WSAStartup() is OK.
Client: socket() is OK.
Client: connect() - Failed to connect.
connect function failed with error: 10061
PS C:\Users\Piter\documents\vs2010\projects\client_socket\debug> ipconfig

我已经使用 netcat 和 powershell 创建了监听套接字(不确定以正确的方式):

PS C:\netcat> ./nc.exe -v -l -p 12345
listening on [any] 12345 ...
Warning: forward host lookup failed for cf16.chello.pl: h_errno 11001: HOST_NOT
connect to [192.168.1.2] from cf16.chello.pl [192.168.1.2] 4473: HOST_NOT_FOUND

第三行和第四行是在另一个 powershell 中创建客户端时发生的情况:

PS C:\netcat> ./nc.exe 192.168.1.2 12345

好的。 当强制 netstat 不解析但使用给定的 IP 时，现在它连接:

PS C:\netcat> ./nc.exe -n -v -l -p 12345
listening on [any] 12345 ...
connect to [192.168.1.2] from (UNKNOWN) [192.168.1.2] 4622

但我的 C++ 仍然返回错误 10061。在服务器运行时 powershell 中没有消息 - 似乎我的客户端根本没有连接 - 服务器什么也没说，只有客户端有错误 10061。 有任何想法吗？ 请帮忙:D

Answer 1

你说的

comp1: 192.168.1.2 port 12345

comp1: 192.168.1.6 port 12345

不知道哪台电脑是server和client。

但是你的客户端代码如下。

clientService.sin_addr.s_addr = inet_addr("192.168.1.5");

您连接到错误的服务器。请检查您的代码。