arduino - 将 esp8266 连接到 AWS IoT

Question

我正在尝试使用 https://github.com/heskew/aws-sdk-arduino 将基于 ESP8266 的 WeMos D1 mini 连接到 Amazon Web Service AWS IoT .

但是，当我刷新设备时，我收到 403 回复，并显示以下消息: “凭证的范围应限定为正确的服务:‘execute-api’。”

改变

this->awsService = "iotdata";

到

this->awsService = "execute-api";

在 AmazonIOTClient.cpp 中导致 404: “没有找到与 http 方法 POST 的路由 things/my-thing/shadow 匹配的方法。” 并且，根据this thread服务应为“iotdata”才能使请求成功。

有人遇到同样的问题并找到了让它运行的方法吗？如果是这样，我们将不胜感激。谢谢!

这里是示例的完整代码:

#include <AmazonIOTClient.h>
#include <Esp8266AWSImplementations.h>
#include <AWSFoundationalTypes.h>
#include "keys.h"

const int sleepTimeS = 30;

void printWiFiData();
void printCurrentNetwork();
void publish(const char *topic, String data);
void publishToAWS();

void setup() {

  Serial.begin(9600);

  Serial.println("Started!");

  publishToAWS();
  ESP.deepSleep(sleepTimeS * 1000000);
}

void loop() {
}

void printWiFiData() {

  // IP address
  Serial.print("IP Address: ");
  Serial.println(WiFi.localIP());

  // MAC address
  byte mac[6];
  WiFi.macAddress(mac);
  Serial.print("MAC address: ");
  Serial.print(mac[5], HEX);
  Serial.print(":");
  Serial.print(mac[4], HEX);
  Serial.print(":");
  Serial.print(mac[3], HEX);
  Serial.print(":");
  Serial.print(mac[2], HEX);
  Serial.print(":");
  Serial.print(mac[1], HEX);
  Serial.print(":");
  Serial.println(mac[0], HEX);
}

void printCurrentNetwork() {

  // SSID
  Serial.print("SSID: ");
  Serial.println(WiFi.SSID());

  // signal strength:
  Serial.print("signal strength (RSSI): ");
  Serial.println(WiFi.RSSI());
}

void publish(const char *topic, String data) {

  AmazonIOTClient iotClient;
  ActionError actionError;

  Esp8266HttpClient httpClient;
  Esp8266DateTimeProvider dateTimeProvider;

  Serial.println();
  Serial.print("Connecting to ");
  Serial.print(wifiSsid);
  Serial.println("...");

  WiFi.begin(wifiSsid, wifiPwd);
  while (WiFi.status() != WL_CONNECTED) {
    Serial.print(".");
    delay(50);
  }

  Serial.println("");
  Serial.println("WiFi connected");

  printCurrentNetwork();
  printWiFiData();

  delay(50);

  Serial.println("Initializing IoT client...");

  iotClient.setAWSRegion(awsIotRegion);
  iotClient.setAWSEndpoint(awsIotEndpoint);
  iotClient.setAWSDomain(awsIotDomain);
  iotClient.setAWSPath("/things/my-thing/shadow");
  iotClient.setAWSKeyID(awsKeyID);
  iotClient.setAWSSecretKey(awsSecKey);
  iotClient.setHttpClient(&httpClient);
  iotClient.setDateTimeProvider(&dateTimeProvider);

  delay(50);

  Serial.println("Updating thing shadow...");

  MinimalString shadow = ("{\"state\":{\"reported\":{\"text\":" + data + "}}}").c_str();
  char* result = iotClient.update_shadow(shadow, actionError);

  Serial.print("result: ");
  Serial.println(result);
}

void publishToAWS() {

  Serial.println("Publishing to AWS IoT Broker");

  publish("my-thing/text", "Hello World!");
}

keys.cpp文件:

#include "keys.h"

// AWS User Credentials
const char* awsKeyID = "XXXXXXXXXXXXXXXXXXXX";
const char* awsSecKey = "X1xxx23xxxxXXXX34XXxxxxX56xXxxxxxxXx789x";

// AWS IoT
const char* awsIotRegion = "eu-central-1";
const char* awsIotEndpoint = "xxxxxxxxxxxxxx";
const char* awsIotDomain = "iot.eu-central-1.amazonaws.com";

// Init and connect WiFi to local WLAN
char* wifiSsid = "mySSID";
char* wifiPwd = "password";

Answer 1

我终于可以贡献一些东西了:)

几天前我得到了这个完全相同的示例。但是我使用了相同的库，只是不同的分支 iot-get-shadow-and-cleanup 。我不记得必须像您提到的那样进行任何更改:

this->awsService = "iotdata"; 到 this->awsService = "execute-api";

以下是进入keys.cpp的AWS端点的正确设置

  awsIotRegion = "us-east-1";
  awsIotEndpoint = "amazonaws.com";
  awsIotDomain = "axxxxs2pxxxrlx.iot.us-east-1.amazonaws.com";`

还将 delete[] result; 添加到 publish() 的末尾，以节省一些宝贵的堆空间。

我建议使用 iot-get-shadow-and-cleanup 分支，因为它修复了内存泄漏。

我又进行了一项更改，以解决连续更新影子时堆空间不足的所有问题。在 AWSClient4.cpp 中，我将 //delete[] server; 更改为 delete[] data; - 我不能 100% 确定这是否有必要，但与添加相结合delete[] result; 我能够连续一个小时每分钟更新一次影子，而不会丢失任何堆。

希望这有帮助。