python - TypeError : float() argument must be a string or a number, 不是 'NoneType'

Question

我知道很多人都问过相关问题，但请帮帮我。我正在尝试复制 opensource temperature control lab我在网上找到的。我想在 Raspberry Pi 上运行它。 这是我不断收到的错误:

    Traceback (most recent call last):
  File "/home/pi/Desktop/Python/test_Temperature.py", line 14, in <module>
    print('Temperature 1: ' + str(a.T1) + ' degC')
  File "/home/pi/Desktop/Python/tclab.py", line 26, in T1
    self._T1 = float(self.read('T1'))
TypeError: float() argument must be a string or a number, not 'NoneType'

生成它的代码是这样的:

import tclab
import numpy as np
import time

try:
    # Connect to Arduino
    a = tclab.TCLab()

    # Get Version
    print(a.version)

    # Temperatures
    print('Temperatures')
    print('Temperature 1: ' + str(a.T1) + ' degC')
    print('Temperature 2: ' + str(a.T2) + ' degC')

    # Turn LED on
    print('LED On')
    a.LED(100)

    # Turn on Heaters (0-100%)
    print('Turn On Heaters (Q1=90%, Q2=80%)')
    a.Q1(90.0)
    a.Q2(80.0)

    # Sleep (sec)
    time.sleep(60.0)

    # Turn Off Heaters
    print('Turn Off Heaters')
    a.Q1(0.0)
    a.Q2(0.0)

    # Temperatures
    print('Temperatures')
    print('Temperature 1: ' + str(a.T1) + ' degC')
    print('Temperature 2: ' + str(a.T2) + ' degC')
    
# Allow user to end loop with Ctrl-C           
except KeyboardInterrupt:
    # Disconnect from Arduino
    a.Q1(0)
    a.Q2(0)
    print('Shutting down')
    a.close()
    
# Make sure serial connection still closes when there's an error
except:           
    # Disconnect from Arduino
    a.Q1(0)
    a.Q2(0)
    print('Error: Shutting down')
    a.close()
    raise

我相信该代码试图通过以下代码与另一个 python 文件进行通信:

import sys
import time
import numpy as np
try:
    import serial
except:
    import pip
    pip.main(['install','pyserial'])
    import serial
from serial.tools import list_ports
        
class TCLab(object):

    def __init__(self, port=None, baud=9600):
        if (sys.platform == 'darwin') and not port:
            port = '/dev/ttyACM1'
    
    def stop(self):
        return self.read('X')
    
    def version(self):
        return self.read('VER')
    
    @property
    def T1(self):
        self._T1 = float(self.read('T1'))
        return self._T1
    
    @property
    def T2(self):
        self._T2 = float(self.read('T2'))
        return self._T2
        
    def LED(self,pwm):
        pwm = max(0.0,min(100.0,pwm))/2.0
        self.write('LED',pwm)
        return pwm

    def Q1(self,pwm):
        pwm = max(0.0,min(100.0,pwm)) 
        self.write('Q1',pwm)
        return pwm
        
    def Q2(self,pwm):
        pwm = max(0.0,min(100.0,pwm)) 
        self.write('Q2',pwm)
        return pwm

    # save txt file with data and set point
    # t = time
    # u1,u2 = heaters
    # y1,y2 = tempeatures
    # sp1,sp2 = setpoints
    def save_txt(self,t,u1,u2,y1,y2,sp1,sp2):
        data = np.vstack((t,u1,u2,y1,y2,sp1,sp2))  # vertical stack
        data = data.T                 # transpose data
        top = 'Time (sec), Heater 1 (%), Heater 2 (%), ' \
          + 'Temperature 1 (degC), Temperature 2 (degC), ' \
          + 'Set Point 1 (degC), Set Point 2 (degC)' 
        np.savetxt('data.txt',data,delimiter=',',header=top,comments='')

    def read(self,cmd):
        cmd_str = self.build_cmd_str(cmd,'')
        try:
            self.sp.write(cmd_str.encode())
            self.sp.flush()
        except Exception:
            return None
        return self.sp.readline().decode('UTF-8').replace("\r\n", "")
    
    def write(self,cmd,pwm):       
        cmd_str = self.build_cmd_str(cmd,(pwm,))
        try:
            self.sp.write(cmd_str.encode())
            self.sp.flush()
        except:
            return None
        return self.sp.readline().decode('UTF-8').replace("\r\n", "")
    
    def build_cmd_str(self,cmd, args=None):
        """
        Build a command string that can be sent to the arduino.
    
        Input:
            cmd (str): the command to send to the arduino, must not
                contain a % character
            args (iterable): the arguments to send to the command
        """
        if args:
            args = ' '.join(map(str, args))
        else:
            args = ''
        return "{cmd} {args}\n".format(cmd=cmd, args=args)
        
    def close(self):
        try:
            self.sp.close()
            print('Arduino disconnected successfully')
        except:
            print('Problems disconnecting from Arduino.')
            print('Please unplug and reconnect Arduino.')
        return True

我还不知道我周围的 python 代码，所以对解决方案的非常清晰的“虚拟类”解释真的很有帮助。谢谢大家。

Answer 1

这是read()函数:

def read(self,cmd):
    cmd_str = self.build_cmd_str(cmd,'')
    try:
        self.sp.write(cmd_str.encode())
        self.sp.flush()
    except Exception:
        return None
    return self.sp.readline().decode('UTF-8').replace("\r\n", "")

它可以返回的内容之一是 None，如您在 return None 行中所见。如果发生这种情况，那么您的线路:

float(self.read('T1'))

会失败，因为它会尝试将 None 转换为 float，这会给出您遇到的错误。