c - 模式 7 仿射变换中相机运动失控的原因？

Question

我正在尝试使用 C 和 SDL2 实现模式 7 效果。最终，我希望能够做出很酷的效果，比如改变高度和视野。但是现在，我只想做一些简单的工作。这是我目前所拥有的:

我的问题是，在转弯时，我似乎在朝着同一个方向前进，即使我试图转向不同的方向。很难对此一目了然，但在运行我的代码后，它应该会变得清晰。

我很困惑为什么会这样。我的代码主要基于 this教程。我在我的 C 代码中留下了注释，描述了每个部分的意图。如果您知道为什么我模拟 SNES 模式 7 的尝试不起作用，请告诉我。注意:要转动，请按左右箭头键，要前进和后退，请按前进和后退。此代码可能不适用于非英特尔系统，因为我依赖于英特尔 SIMD 内在函数。如果有帮助，我正在使用 clang 12.0.5。

这是驱动效果的 mode_7 函数:

void mode_7(const Camera camera, const Screen screen, const Sprite* sprite, const Uint8* keys) {
    static Uint32 local_buffer[height][width];

    const int height_center = height / 2;
    const Vector dimensions = vec_set(sprite -> w);

    for (int z = -height_center; z < height_center; z++) {
        const int y = z + height_center;

        for (int x = 0; x < width; x++) {
            const int reverse_x = width - x;

            const Vector rot_pos_3D = {
                reverse_x * camera.dir[1] + x * camera.dir[0],
                reverse_x * camera.dir[0] - x * camera.dir[1]
            };

            const Vector pos_2D = vec_add(camera.pos, vec_div(rot_pos_3D, vec_set(z)));
            const Vector floor_pos_2D = {floor(pos_2D[0]), floor(pos_2D[1])};
            const Vector tex_pos = vec_mul(vec_sub(pos_2D, floor_pos_2D), dimensions);

            local_buffer[y][x] = read_sprite_pixel(sprite, (long) tex_pos[0], (long) tex_pos[1]);
        }
    }
    memcpy(screen.pixels, local_buffer, width * height * sizeof(Uint32));
}

这就是我计算相机的位置、方向和角度的方式:

void update_camera(Camera* camera, const Uint8* keys) {
    if (keys[SDL_SCANCODE_LEFT]) {
        if ((camera -> angle -= camera -> v_turn) < 0.0) camera -> angle = two_pi;
    }
    if (keys[SDL_SCANCODE_RIGHT]) {
        if ((camera -> angle += camera -> v_turn) > two_pi) camera -> angle = 0.0;
    }

    camera -> dir = (Vector) {cos(camera -> angle), sin(camera -> angle)};
    const Vector forward_movement = vec_mul(camera -> dir, vec_set(camera -> v_move));
    
    Vector movement = {0.0, 0.0};
    if (keys[SDL_SCANCODE_UP])
        movement = vec_add(movement, forward_movement);
    if (keys[SDL_SCANCODE_DOWN])
        movement = vec_sub(movement, forward_movement);

    camera -> pos = vec_add(camera -> pos, movement);
}

所有代码，包括上面的代码，如果您想尝试一下，都在下面。

// SDL2 header, handy macros, constants, typedefs

#include <SDL2/SDL.h>

#define FAIL(...) {fprintf(stderr, __VA_ARGS__); exit(1);}

#define vec_set _mm_set1_pd
#define vec_add _mm_add_pd
#define vec_sub _mm_sub_pd
#define vec_mul _mm_mul_pd
#define vec_div _mm_div_pd

const double two_pi = M_PI * 2.0;

enum {
    fps = 60, width = 800, height = 600,
    pixel_format = SDL_PIXELFORMAT_ARGB8888, pixel_format_bpp = 4
};

typedef SDL_Surface Sprite;
typedef __m128d Vector;

typedef struct {
    SDL_Window* window;
    SDL_Renderer* renderer;
    SDL_Texture* buffer;
    SDL_PixelFormat* pixel_format;
    void* pixels;
    int pixel_pitch;
} Screen;

typedef struct {
    Vector pos, dir;
    double angle;
    const double v_move, v_turn;
} Camera;

// abstraction for the screen

Screen init_screen(void) {
    if (SDL_Init(SDL_INIT_VIDEO | SDL_INIT_TIMER) < 0)
        FAIL("Could not initialize SDL\n");

    SDL_SetHintWithPriority(SDL_HINT_RENDER_VSYNC, "1", SDL_HINT_OVERRIDE);

    Screen screen;
    SDL_CreateWindowAndRenderer(width, height, SDL_RENDERER_ACCELERATED, &screen.window, &screen.renderer);
    screen.buffer = SDL_CreateTexture(screen.renderer, pixel_format, SDL_TEXTUREACCESS_STREAMING, width, height);
    screen.pixel_format = SDL_AllocFormat(pixel_format);

    SDL_SetWindowTitle(screen.window, "Mode 7");
    SDL_SetRenderTarget(screen.renderer, NULL);
    SDL_SetRenderDrawColor(screen.renderer, 0, 0, 0, 0);

    return screen;
}

void deinit_screen(const Screen screen) {
    SDL_DestroyWindow(screen.window);
    SDL_DestroyRenderer(screen.renderer);
    SDL_DestroyTexture(screen.buffer);
    SDL_FreeFormat(screen.pixel_format);
    SDL_Quit();
}

void clear_screen(Screen* const screen) {
    SDL_LockTexture(screen -> buffer, NULL, &screen -> pixels, &screen -> pixel_pitch);
}

void refresh_screen(const Screen screen, const Uint32 before) {
    SDL_UnlockTexture(screen.buffer);
    SDL_RenderCopy(screen.renderer, screen.buffer, NULL, NULL);
    SDL_RenderPresent(screen.renderer);

    const int wait = fps / 1000 - (SDL_GetTicks() - before);
    if (wait > 0) SDL_Delay(wait);
}

// abstraction for sprites

Sprite* init_sprite(const char* const path, const SDL_PixelFormat* pixel_format) {
    SDL_Surface* const unconverted_surface = SDL_LoadBMP(path);
    if (unconverted_surface == NULL) FAIL("Could not load a sprite of path %s\n", path);

    SDL_Surface* const converted_surface = SDL_ConvertSurface(unconverted_surface, pixel_format, 0);
    if (converted_surface == NULL) FAIL("Could not convert a sprite's surface type: %s\n", path);
    SDL_FreeSurface(unconverted_surface);
    SDL_LockSurface(converted_surface);

    return converted_surface;
}

void deinit_sprite(Sprite* sprite) {
    SDL_UnlockSurface(sprite);
    SDL_FreeSurface(sprite);
}

Uint32 read_sprite_pixel(const Sprite* sprite, const int x, const int y) {
    return *(Uint32*) ((Uint8*) sprite -> pixels + y * sprite -> pitch + x * pixel_format_bpp);
}

// the core of my code

void mode_7(const Camera camera, const Screen screen, const Sprite* sprite, const Uint8* keys) {
    static Uint32 local_buffer[height][width];

    const int height_center = height / 2;
    const Vector dimensions = vec_set(sprite -> w);

    for (int z = -height_center; z < height_center; z++) {
        const int y = z + height_center;

        for (int x = 0; x < width; x++) {
            const int reverse_x = width - x;

            const Vector rot_pos_3D = {
                reverse_x * camera.dir[1] + x * camera.dir[0],
                reverse_x * camera.dir[0] - x * camera.dir[1]
            };

            const Vector pos_2D = vec_add(camera.pos, vec_div(rot_pos_3D, vec_set(z)));
            const Vector floor_pos_2D = {floor(pos_2D[0]), floor(pos_2D[1])};
            const Vector tex_pos = vec_mul(vec_sub(pos_2D, floor_pos_2D), dimensions);

            local_buffer[y][x] = read_sprite_pixel(sprite, (long) tex_pos[0], (long) tex_pos[1]);
        }
    }
    memcpy(screen.pixels, local_buffer, width * height * sizeof(Uint32));
}

// input reading + main

void update_camera(Camera* camera, const Uint8* keys) {
    if (keys[SDL_SCANCODE_LEFT]) {
        if ((camera -> angle -= camera -> v_turn) < 0.0) camera -> angle = two_pi;
    }
    if (keys[SDL_SCANCODE_RIGHT]) {
        if ((camera -> angle += camera -> v_turn) > two_pi) camera -> angle = 0.0;
    }

    camera -> dir = (Vector) {cos(camera -> angle), sin(camera -> angle)};
    const Vector forward_movement = vec_mul(camera -> dir, vec_set(camera -> v_move));
    
    Vector movement = {0.0, 0.0};
    if (keys[SDL_SCANCODE_UP])
        movement = vec_add(movement, forward_movement);
    if (keys[SDL_SCANCODE_DOWN])
        movement = vec_sub(movement, forward_movement);

    camera -> pos = vec_add(camera -> pos, movement);
}

int main(void) {
    Screen screen = init_screen();
    Sprite* sprite = init_sprite("../assets/dirt.bmp", screen.pixel_format);
    Camera camera = {{0.0, 0.0}, {0.0, 0.0}, 0.0, 0.1, 0.05};

    const Uint8* keys = SDL_GetKeyboardState(NULL);
    SDL_Event event;
    while (1) {
        const Uint32 before = SDL_GetTicks();
        while (SDL_PollEvent(&event)) {
            if (event.type == SDL_QUIT) {
                deinit_sprite(sprite);
                deinit_screen(screen);
                return 0;
            }
        }
        update_camera(&camera, keys);
        clear_screen(&screen);
        mode_7(camera, screen, sprite, keys);
        refresh_screen(screen, before);
    }   
}

Answer 1

您的代码存在两个主要问题。 一部分是:

const Vector rot_pos_3D = {
    reverse_x * camera.dir[1] + x * camera.dir[0],
    reverse_x * camera.dir[0] - x * camera.dir[1]
};

当 x 从 0 变为 width 时，这部分应该在两点之间进行或多或少的线性插值。一个位于 camera.dir 指向前方。另一个指向正交方向{camera.dir[1], -camera.dir[0]}。

见下图:

但是，看起来坐标被交换了。应该是:

const Vector rot_pos_3D = {
    reverse_x * camera.dir[0] - x * camera.dir[1],
    reverse_x * camera.dir[1] + x * camera.dir[0],
};

现在导航变得不那么困惑了。然而，玩家的眼睛总是像上图一样看向左前方。

该问题的一个简单解决方案是将屏幕放在播放器前方的点 (FORWARD+LEFT) 和 (FORWARD-LEFT) 之间，如下图所示。

此修复与以下补丁一起应用:

@@ -107,6 +107,8 @@ void mode_7(const Camera camera, const Screen screen, const Sprite* sprite, cons
     const int height_center = height / 2;
     const Vector dimensions = vec_set(sprite -> w);
 
+    double d0[2] = {camera.dir[0] + camera.dir[1], camera.dir[1] - camera.dir[0]};
+    double d1[2] = {camera.dir[0] - camera.dir[1], camera.dir[1] + camera.dir[0]};
     for (int z = -height_center; z < height_center; z++) {
         const int y = z + height_center;
 
@@ -114,11 +116,11 @@ void mode_7(const Camera camera, const Screen screen, const Sprite* sprite, cons
             const int reverse_x = width - x;
 
             const Vector rot_pos_3D = {
-                reverse_x * camera.dir[1] + x * camera.dir[0],
-                reverse_x * camera.dir[0] - x * camera.dir[1]
+                reverse_x * d0[0] + x * d1[0],
+                reverse_x * d0[1] + x * d1[1],
             };
 

另一个问题是向相反方向移动的“天花板”。这是由屏幕上部的负“z”除法引起的。只需应用 abs():

-            const Vector pos_2D = vec_add(camera.pos, vec_div(rot_pos_3D, vec_set(z)));
+            const Vector pos_2D = vec_add(camera.pos, vec_div(rot_pos_3D, vec_set(abs(z))));

现在应该可以正确渲染无限空间了。