docker - Hyperledger Fabric:在 “Peer Chaincode Instantiate”命令上启动链码时超时

标签 docker docker-compose hyperledger-fabric blockchain hyperledger

我正在尝试使用“对等链码实例化”命令实例化已安装的链码(如下所示)。执行命令时，我收到以下错误消息:

实例化链码的命令:

peer chaincode instantiate -o orderer.proofofownership.com:7050 --tls --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/proofofownership.com/orderers/orderer.proofofownership.com/msp/tlscacerts/tlsca.proofofownership.com-cert.pem -C dmanddis -n CreateDiamond -v 1.0 -c '{"Args":[]}' -P "OR ('DiamondManufacturerMSP.peer','DistributorMSP.peer')"

错误消息:
Error: Error endorsing chaincode: rpc error: code = Unknown desc = timeout expired while starting chaincode CreateDiamond:1.0(networkid:dev,peerid:peer0.dm.proofofownership.com,tx:1a96ecc8763e214ee543ecefe214df6025f8e98f2449f2b7877d04655ddadb49)

我尝试通过在“peer-base.yaml文件”中添加以下属性来纠正此问题
- CORE_CHAINCODE_EXECUTETIMEOUT=300s
- CORE_CHAINCODE_DEPLOYTIMEOUT=300s

虽然，我仍然收到此特定错误。

以下是我的Docker容器配置:

peer-base.yaml文件:
services:
peer-base:
image: hyperledger/fabric-peer:x86_64-1.1.0
environment:
  - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
  # the following setting starts chaincode containers on the same
  # bridge network as the peers
  # https://docs.docker.com/compose/networking/
  #- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=proof_of_ownership_pow
  #- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=pow
  #- CORE_LOGGING_LEVEL=INFO
  - CORE_LOGGING_LEVEL=DEBUG
  - CORE_PEER_TLS_ENABLED=true
  - CORE_CHAINCODE_EXECUTETIMEOUT=300s
  - CORE_CHAINCODE_DEPLOYTIMEOUT=300s
  #- CORE_PEER_TLS_ENABLED=false
  - CORE_PEER_GOSSIP_USELEADERELECTION=true
  - CORE_PEER_GOSSIP_ORGLEADER=false
  - CORE_PEER_PROFILE_ENABLED=true
  - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
  - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
  - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
command: peer node start

cli-“docker-compose-cli.yaml”文件中的容器配置:
cli:
container_name: cli
image: hyperledger/fabric-tools:x86_64-1.1.0
tty: true
stdin_open: true
environment:
  - GOPATH=/opt/gopath
  - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
  - CORE_LOGGING_LEVEL=DEBUG
  #- CORE_LOGGING_LEVEL=INFO
  - CORE_PEER_ID=cli
  - CORE_PEER_ADDRESS=peer0.dm.proofofownership.com:7051
  - CORE_PEER_LOCALMSPID=DiamondManufacturerMSP
  - CORE_PEER_TLS_ENABLED=true
  - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/dm.proofofownership.com/peers/peer0.dm.proofofownership.com/tls/server.crt
  - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/dm.proofofownership.com/peers/peer0.dm.proofofownership.com/tls/server.key
  - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/dm.proofofownership.com/peers/peer0.dm.proofofownership.com/tls/ca.crt
  - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/dm.proofofownership.com/users/Admin@dm.proofofownership.com/msp
  - CORE_PEER_CHAINCODELISTENADDRESS=peer0.dm.proofofownership.com:7052
  #- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=host
  #- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=pow
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
command: /bin/bash
volumes:
    - /var/run/:/host/var/run/
    #- ./../chaincode/:/opt/gopath/src/github.com/chaincode
    #- ./chaincode/CreateDiamond/go:/opt/gopath/src/github.com/chaincode/
    - ./chaincode/CreateDiamond:/opt/gopath/src/github.com/hyperledger/fabric/peer/chaincode/
    - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
    - ./scripts:/opt/gopath/src/github.com/hyperledger/fabric/peer/scripts/
    - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
depends_on:
  - orderer.proofofownership.com
  - peer0.dm.proofofownership.com
  - peer1.dm.proofofownership.com 
  - peer0.dist.proofofownership.com
  - peer1.dist.proofofownership.com
#network_mode: host
networks:
  - pow

“docker-compose-base.yaml”文件中的对等配置:
peer0.dm.proofofownership.com:
container_name: peer0.dm.proofofownership.com
extends:
  file: peer-base.yaml
  service: peer-base
environment:
  - CORE_PEER_ID=peer0.dm.proofofownership.com
  #- CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/dm.proofofownership.com/users/Admin@dm.proofofownership.com/msp
  #- CORE_PEER_MSPCONFIGPATH=/home/john/Proof-Of-Ownership/crypto-config/peerOrganizations/dm.proofofownership.com/users/Admin@dm.proofofownership.com/msp
  - CORE_PEER_ADDRESS=peer0.dm.proofofownership.com:7051
  - CORE_PEER_GOSSIP_BOOTSTRAP=peer0.dm.proofofownership.com:7051
  - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.dm.proofofownership.com:7051
  - CORE_PEER_LOCALMSPID=DiamondManufacturerMSP
  - CORE_PEER_CHAINCODELISTENADDRESS=peer0.dm.proofofownership.com:7052
  #- CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/dm.proofofownership.com/peers/peer0.dm.proofofownership.com/tls/ca.crt
  #- CORE_PEER_TLS_ROOTCERT_FILE=/home/john/Proof-Of-Ownership/crypto-config/peerOrganizations/dm.proofofownership.com/peers/peer0.dm.proofofownership.com/tls/ca.crt
volumes:
    - /var/run/:/host/var/run/
    - ../crypto-config/peerOrganizations/dm.proofofownership.com/peers/peer0.dm.proofofownership.com/msp:/etc/hyperledger/fabric/msp
    - ../crypto-config/peerOrganizations/dm.proofofownership.com/peers/peer0.dm.proofofownership.com/tls:/etc/hyperledger/fabric/tls
    - peer0.dm.proofofownership.com:/var/hyperledger/production
ports:
  - 7051:7051
  - 7053:7053

“docker-compose-base.yaml”文件中的订购者配置:
orderer.proofofownership.com:
container_name: orderer.proofofownership.com
image: hyperledger/fabric-orderer:x86_64-1.1.0
environment:
  # CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE Newly Added
  #- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=proof_of_ownership_pow
  #- CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=pow
  - ORDERER_GENERAL_LOGLEVEL=DEBUG
  - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
  - ORDERER_GENERAL_GENESISMETHOD=file
  #- ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
  - ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/genesis.block
  - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
  - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
  # enabled TLS
  - ORDERER_GENERAL_TLS_ENABLED=true
  #- ORDERER_GENERAL_TLS_ENABLED=false
  - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
  - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
  - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
  # New Addition
  - CONFIGTX_ORDERER_ORDERERTYPE=solo
  - CONFIGTX_ORDERER_BATCHSIZE_MAXMESSAGECOUNT=10
  - CONFIGTX_ORDERER_BATCHTIMEOUT=2s
  - CONFIGTX_ORDERER_ADDRESSES=[127.0.0.1:7050]
#working_dir: /opt/gopath/src/github.com/hyperledger/fabric
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/orderer
command: orderer
volumes:
- ../channel-artifacts/genesis.block:/var/hyperledger/orderer/genesis.block
- ../crypto-config/ordererOrganizations/proofofownership.com/orderers/orderer.proofofownership.com/msp:/var/hyperledger/orderer/msp
- ../crypto-config/ordererOrganizations/proofofownership.com/orderers/orderer.proofofownership.com/tls/:/var/hyperledger/orderer/tls
- orderer.proofofownership.com:/var/hyperledger/production/orderer
ports:
  - 7050:7050

我还查看了对等方的docker容器日志(使用docker logs)，并收到了以下日志:
Launch -> ERRO 3eb launchAndWaitForRegister failed: timeout expired while starting chaincode CreateDiamond:1.0(networkid:dev,peerid:peer0.dm.proofofownership.com,tx:cc34a20176d7f09e1537b039f3340450e08f6447bf16965324655e72a2a58623)
2018-08-01 12:59:08.739 UTC [endorser] simulateProposal -> ERRO 3ed [dmanddis][cc34a201] failed to invoke chaincode name:"lscc" , error: timeout expired while starting chaincode CreateDiamond:1.0(networkid:dev,peerid:peer0.dm.proofofownership.com,tx:cc34a20176d7f09e1537b039f3340450e08f6447bf16965324655e72a2a58623)

在安装链码时收到以下日志:
2018-08-03 09:44:55.822 UTC [msp] GetLocalMSP -> DEBU 001 Returning existing local MSP
2018-08-03 09:44:55.822 UTC [msp] GetDefaultSigningIdentity -> DEBU 002 Obtaining default signing identity
2018-08-03 09:44:55.822 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 003 Using default escc
2018-08-03 09:44:55.822 UTC [chaincodeCmd] checkChaincodeCmdParams -> INFO 004 Using default vscc
2018-08-03 09:44:55.822 UTC [chaincodeCmd] getChaincodeSpec -> DEBU 005 java chaincode disabled
2018-08-03 09:44:58.270 UTC [golang-platform] getCodeFromFS -> DEBU 006 getCodeFromFS github.com/hyperledger/fabric/peer/chaincode
2018-08-03 09:45:02.089 UTC [golang-platform] func1 -> DEBU 007 Discarding GOROOT package bytes
2018-08-03 09:45:02.089 UTC [golang-platform] func1 -> DEBU 008 Discarding GOROOT package encoding/json
2018-08-03 09:45:02.089 UTC [golang-platform] func1 -> DEBU 009 Discarding GOROOT package fmt
2018-08-03 09:45:02.090 UTC [golang-platform] func1 -> DEBU 00a Discarding provided package github.com/hyperledger/fabric/core/chaincode/shim
2018-08-03 09:45:02.090 UTC [golang-platform] func1 -> DEBU 00b Discarding provided package github.com/hyperledger/fabric/protos/peer
2018-08-03 09:45:02.090 UTC [golang-platform] func1 -> DEBU 00c Discarding GOROOT package strconv
2018-08-03 09:45:02.090 UTC [golang-platform] func1 -> DEBU 00d skipping dir: /opt/gopath/src/github.com/hyperledger/fabric/peer/chaincode/go
2018-08-03 09:45:02.090 UTC [golang-platform] GetDeploymentPayload -> DEBU 00e done
2018-08-03 09:45:02.090 UTC [container] WriteFileToPackage -> DEBU 00f Writing file to tarball: src/github.com/hyperledger/fabric/peer/chaincode/CreateDiamond.go
2018-08-03 09:45:02.122 UTC [msp/identity] Sign -> DEBU 010 Sign: plaintext: 0AE3070A5B08031A0B089EC890DB0510...EC7BFE1B0000FFFFEE433C37001C0000
2018-08-03 09:45:02.122 UTC [msp/identity] Sign -> DEBU 011 Sign: digest: E5160DE95DB096379967D959FA71E692F098983F443378600943EA5D7265A82C 
2018-08-03 09:45:02.230 UTC [chaincodeCmd] install -> DEBU 012 Installed remotely response:<status:200 payload:"OK" >
2018-08-03 09:45:02.230 UTC [main] main -> INFO 013 Exiting.....

最佳答案

在对等配置中，您为链码端点指定的端口与对等地址不同(链码端点端口7052，对端地址在7051上):

CORE_PEER_CHAINCODELISTENADDRESS=peer0.dm.proofofownership.com:7052

但是此端口未暴露。请将其添加到您的对等端口配置中:
- 7052:7052

关于docker - Hyperledger Fabric:在 “Peer Chaincode Instantiate”命令上启动链码时超时，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/51649139/

上一篇：scala - 缓存与 localCheckpoint 以及如何阻止 Spark 删除它？

下一篇：docker - Docker Swarm:Calico节点Pod不健康

相关文章：

docker-compose:网络和链接之间的区别

docker - 如何使用 docker elk 堆栈设置 kibana 用户凭据

Docker 从缓存中构建已删除的模块

hyperledger-fabric - hyperledger fabric 的 configtx yaml 中的 "Policies"是什么？

hyperledger-fabric - 无法调用链码名称 :"lscc"，错误 : container exited with 1: chaincode registration failed (Fabric 1. 4.1)

docker - 在 Windows 上的代理后面设置 docker 工具箱

docker - 运行“docker-compose up时出错

docker - Gitlab 使用 helm 安装分蘖导致 kubernetes-charts.storage.googleapis.com 不是有效的图表存储库

go - 在 Hyperledger Fabric V1.0 链代码中识别调用同级/组织

php - Composer 不在 docker 容器 : "https://packagist.org/packages.json" does not contain valid JSON 中工作

©2024 IT工具网  联系我们