注意:我不是新手,我已经这样做了无数次,但由于某种原因,今天它决定不起作用。
尝试通过 SSH 连接到 github 或尝试克隆存储库时,即使在重新制作 ssh key 并将其添加到“SSH”之后,我仍然不断收到权限被拒绝(公钥)。
错误消息我的帐户中的“ key ”。
这是我今天尝试做的十次但没有成功:
- 使用 ssh-keygen 创建 key 。
- 使用 Gedit 或 Notepad++ 打开 ~/.ssh/id_rsa.pub 并复制内容。
- 前往 github.com 上的帐户设置
- 转到 SSH key
- 点击“添加 key ”按钮。
- 给 key 一个标题
- 将 key 粘贴到 key 盒中。
- 保存 key (输入我的 github 密码进行验证)。
现在,当我尝试执行 ssh github.com
时,它根本不起作用......这到底是怎么回事?我现在是太累了还是错过了什么?
这是 ssh -vvv github.com
的输出
OpenSSH_5.9p1, OpenSSL 1.0.0f 4 Jan 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to github.com [207.97.227.239] port 22.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/trusktr/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /home/trusktr/.ssh/id_rsa type 1
debug1: identity file /home/trusktr/.ssh/id_rsa-cert type -1
debug1: identity file /home/trusktr/.ssh/id_dsa type -1
debug1: identity file /home/trusktr/.ssh/id_dsa-cert type -1
debug1: identity file /home/trusktr/.ssh/id_ecdsa type -1
debug1: identity file /home/trusktr/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5github2
debug1: match: OpenSSH_5.1p1 Debian-5github2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "github.com" from file "/home/trusktr/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/trusktr/.ssh/known_hosts:16
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-rsa-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-rsa,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ssh-dss-cert-v01@openssh.com,ssh-dss-cert-v00@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 122/256
debug2: bits set: 510/1024
d ebug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 16:27:ac:a5:76:28:2d:36:63:1b:56:4d:eb:df:a6:48
debug3: load_hostkeys: loading entries for host "github.com" from file "/home/trusktr/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/trusktr/.ssh/known_hosts:16
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "207.97.227.239" from file "/home/trusktr/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/trusktr/.ssh/known_hosts:16
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'github.com' is known and matches the RSA host key.
debug1: Found key in /home/trusktr/.ssh/known_hosts:16
debug2: bits set: 497/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/trusktr/.ssh/id_rsa (0x14cce60)
debug2: key: trusktr@rocketship (0x14ce2b0)
debug2: key: /home/trusktr/.ssh/id_dsa ((nil))
debug2: key: /home/trusktr/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/trusktr/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey
debug1: Offering RSA public key: trusktr@rocketship
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey
debug1: Trying private key: /home/trusktr/.ssh/id_dsa
debug3: no such identity: /home/trusktr/.ssh/id_dsa
debug1: Trying private key: /home/trusktr/.ssh/id_ecdsa
debug3: no such identity: /home/trusktr/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey).
最佳答案
GitHub ssh setup提到测试您的 GitHub 连接:
$ ssh -T git@github.com
遵循 ssh uri syntax (也在“this answer”中进行了说明)。
但你做到了:
ssh github.com
(没有任何用户)。在这种情况下,ssh 将恢复为 SCP syntax ,它依赖于 ~/.ssh/config
文件,其中包含“github.com
”部分,以列出:
- 用户
- 主机名
- (以及可选的公钥位置,但默认情况下它将尝试
~/.ssh/id_rsa.pub
)
要将其更改为常规 SSH URL,请勿直接编辑 .git/config 文件,如下所示。
使用command git remote set-url
:
git remote set-url origin git@github.com:username/repo.git
关于ssh - 为什么我的 SSH key 无法连接到 github?,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/9960897/