我一直在将 NEHotspotHelper 整合到我管理强制网络的应用程序中，但我遇到了多个问题。在设置为高置信度的网络处于评估状态后，我没有收到身份验证命令 (kNEHotspotHelperCommandTypeAuthenticate)。此外，当在设置的 Wi-Fi 列表中选择 SSID 时，我的 WISPr 网络永远不会收到评估命令(kNEHotspotHelperCommandTypeEvaluate)。我对 WISPr 热点的目标是发送一个需要用户操作的 UINotification。任何人都知道我在这两种情况下没有收到 kNEHotspotHelperCommandTypeAuthenticate 和 kNEHotspotHelperCommandTypeEvaluate 时遗漏了什么？
我在我的应用委托(delegate)中这样设置了 HotspotHelper registerWithOptions:
NSMutableDictionary* options = [[NSMutableDictionary alloc] init];
[options setObject:@"Hotspot" forKey:kNEHotspotHelperOptionDisplayName];/
dispatch_queue_t queue = dispatch_queue_create("com.myapp.ex", 0);
BOOL returnType = [NEHotspotHelper registerWithOptions:options queue:queue handler: ^(NEHotspotHelperCommand * cmd) {
NEHotspotNetwork* network;
NSLog(@"COMMAND TYPE: %ld", (long)cmd.commandType);
if (cmd.commandType == kNEHotspotHelperCommandTypeEvaluate || cmd.commandType ==kNEHotspotHelperCommandTypeFilterScanList) {
for (network in cmd.networkList) {
NSLog(@"COMMAND TYPE After: %ld", (long)cmd.commandType);
if ([network.SSID isEqualToString:@"test-WPA-2"]|| [network.SSID isEqualToString:@"WISPr Hotspot"]) {
double signalStrength = network.signalStrength;
NSLog(@"Signal Strength: %f", signalStrength);
[network setConfidence:kNEHotspotHelperConfidenceHigh];
[network setPassword:@"myPassword"];
NEHotspotHelperResponse *response = [cmd createResponse:kNEHotspotHelperResultSuccess];
NSLog(@"Response CMD %@", response);
[response setNetworkList:@[network]];
[response setNetwork:network];
[response deliver];
}
}
}
}];
最佳答案
我在上面的代码中犯的第一个错误:我期望命令类型 Evaluate 枚举网络列表。但是，Evaluate 命令实际上是在寻找传递给连接的网络。我使用以下代码获取当前网络:
NSArray *array = [NEHotspotHelper supportedNetworkInterfaces];
NEHotspotNetwork *connectedNetwork = [array lastObject];
NSLog(@"supported Network Interface: %@", connectedNetwork);
然后检查连接列表是否与我的 SSID 匹配，如果匹配，我设置该网络的置信度并将响应传递给 Evaluate:
[connectedNetwork setConfidence:kNEHotspotHelperConfidenceLow];
//[response setNetworkList:@[network]];
[response setNetwork:connectedNetwork];
[response deliver];
处理程序给出的下一个命令是身份验证。我的完整代码如下所示，我仍在处理身份验证后的命令。完整的代码行是:
BOOL returnType = [NEHotspotHelper registerWithOptions:options queue:queue handler: ^(NEHotspotHelperCommand * cmd) {
NEHotspotNetwork* network;
if (cmd.commandType ==kNEHotspotHelperCommandTypeFilterScanList) {
for (network in cmd.networkList) {
//need to check against list of directories
if ([network.SSID isEqualToString:@"test-WPA-2"]) {
NSLog(@"%@", network.SSID);
NSLog(@"SSID is in Directory: %@", network.SSID);
double signalStrength = network.signalStrength;
NSLog(@"Signal Strength: %f", signalStrength);
[network setConfidence:kNEHotspotHelperConfidenceLow];
[network setPassword:@"password"];
NEHotspotHelperResponse *response = [cmd createResponse:kNEHotspotHelperResultSuccess];
NSLog(@"Response CMD %@", response);
[response setNetworkList:@[network]];
[response setNetwork:network];
[response deliver];
}
}
}
if (cmd.commandType == kNEHotspotHelperCommandTypeEvaluate) {
/* * When a network is joined initially, the state machine enters
* the Evaluating state. In that state, each HotspotHelper receives a
* command of type Evaluate. If one or more helpers indicates that it
* is able to handle the network, the one with the highest confidence
* level is chosen before entering the Authenticating state. As an
* optimization, the first helper to assert a high confidence wins and
* the state machine ignores the other helpers.
*
* If no helpers claim the network, the state machine enters the
* Authenticated state.
*/
NSArray *array = [NEHotspotHelper supportedNetworkInterfaces];
NEHotspotNetwork *connectedNetwork = [array lastObject];
NSLog(@"supported Network Interface: %@", connectedNetwork);
NEHotspotHelperResponse *response = [cmd createResponse:kNEHotspotHelperResultSuccess];
NSLog(@"Response CMD %@", response);
[connectedNetwork setConfidence:kNEHotspotHelperConfidenceLow];
//[response setNetworkList:@[network]];
[response setNetwork:connectedNetwork];
[response deliver];
}
if (cmd.commandType == kNEHotspotHelperCommandTypeAuthenticate) {
NSLog(@"COMMAND TYPE In Auth ***********: %ld \n\n\n\n\n\n", (long)cmd.commandType);
/*
* In the Authenticating state, the chosen helper is given a command of type
* Authenticate. The helper is expected to perform whatever network
* processing is required to make the network available for general
* network traffic. If the authentication is successful, the helper
* indicates that with a Success result. The state machine enters the
* Authenticated state.
*
* On a network that has been authenticated by a helper, the state machine
* enters the Maintaining state when the network is joined again, and also
* periodically while the system remains associated with the network. In the
* Maintaining state, the helper is expected to perform whatever network
* operations are required to determine if the network is still able to
* carry general network traffic. If that is the case, the helper returns
* Success. If not, and authentication is again required, it returns
* AuthenticationRequired to cause the state machine to re-enter the
* Authenticating state.
*
* In the Authenticating state, if the helper determines that it requires
* user interaction to proceed, the helper first arranges to alert
* the user via a UserLocalNotification, then returns a result of
* UIRequired. The state machine enters the PresentingUI state.*/
}
if (cmd.commandType == kNEHotspotHelperCommandTypePresentUI) {
NSLog(@"COMMAND TYPE In Present UI ***********: %ld \n\n\n\n\n\n", (long)cmd.commandType);
}
}];
关于ios - NEHotspotHelper 未获得 Authenication/Evaulate 命令 NetworkExtension，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/32975104/