c++ - 没有制定目标的规则，.elf 需要

Question

我是新手，在构建我为 arduino 编写的代码时遇到问题。当我尝试构建版本时，它完成了构建，但尽管出现了错误:

 make: *** No rule to make target `/home/jonas/Dokumente/Studium/7.', needed by `test123.elf'.

我完全不知道我能做些什么来修复这个错误

这是我的 makefile 的样子

################################################################################
# Automatically-generated file. Do not edit!
################################################################################

-include ../makefile.init

RM := rm -rf

# All of the sources participating in the build are defined here
-include sources.mk
-include subdir.mk
-include arduino/core/subdir.mk
-include objects.mk

ifneq ($(MAKECMDGOALS),clean)
ifneq ($(strip $(C++_DEPS)),)
-include $(C++_DEPS)
endif
ifneq ($(strip $(C_DEPS)),)
-include $(C_DEPS)
endif
ifneq ($(strip $(CC_DEPS)),)
-include $(CC_DEPS)
endif
ifneq ($(strip $(CPP_DEPS)),)
-include $(CPP_DEPS)
endif
ifneq ($(strip $(CXX_DEPS)),)
-include $(CXX_DEPS)
endif
ifneq ($(strip $(C_UPPER_DEPS)),)
-include $(C_UPPER_DEPS)
endif
endif

-include ../makefile.defs`enter code here`

# Add inputs and outputs from these tool invocations to the build variables 
AR += \
/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/arduino.ar \

ELF += \
test123.elf \

EEP += \
test123.eep \

FLASH_IMAGE += \
test123.hex \


# All Target
all: test123

# Tool invocations
test123: $(FLASH_IMAGE)
    @echo 'Building target: $@'
    @echo 'Printing size:'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-size" -A "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.hex"
    @echo 'Finished building target: $@'
    @echo ' '

/home/jonas/Dokumente/Studium/7.\ Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/arduino.ar: $(AR_OBJ)
    @echo 'Starting archiver'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-ar" rcs "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/arduino.ar"   $(AR_OBJ)
    @echo 'Finished building: $@'
    @echo ' '

test123.elf: $(LINK_OBJ) $(AR)
    @echo 'Starting combiner'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-gcc" -Os -Wl,--gc-sections -mmcu=atmega328p -o "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.elf"   $(LINK_OBJ) $(AR)  "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/arduino.ar" "-L/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release" -lm
    @echo 'Finished building: $@'
    @echo ' '

test123.eep: $(ELF)
    @echo 'Create eeprom image'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "/home/jonas/Dokumente/Studium/7. Semester/Projekt /Autopilotwc/trunk/Software/test123/Release/test123.elf" "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.eep"
    @echo 'Finished building: $@'
    @echo ' '

test123.hex: $(EEP)
    @echo 'Create Flash image (ihex format)'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-objcopy" -O ihex -R .eeprom "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.elf" "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.hex"
    @echo 'Finished building: $@'
    @echo ' '

# Other Targets
clean:
    -$(RM) $(ELF)$(C++_DEPS)$(AR)$(C_DEPS)$(CC_DEPS)$(FLASH_IMAGE)$(AR_OBJ)$(CPP_DEPS)$(LINK_OBJ)$(EEP)$(CXX_DEPS)$(C_UPPER_DEPS)$(SIZEDUMMY) test123
    -@echo ' '

.PHONY: all clean dependents
.SECONDARY:

-include ../makefile.targets


################################################################################
# Automatically-generated file. Do not edit!
################################################################################

-include ../makefile.init

RM := rm -rf

# All of the sources participating in the build are defined here
-include sources.mk
-include subdir.mk
-include arduino/core/subdir.mk
-include objects.mk

ifneq ($(MAKECMDGOALS),clean)
ifneq ($(strip $(C++_DEPS)),)
-include $(C++_DEPS)
endif
ifneq ($(strip $(C_DEPS)),)
-include $(C_DEPS)
endif
ifneq ($(strip $(CC_DEPS)),)
-include $(CC_DEPS)
endif
ifneq ($(strip $(CPP_DEPS)),)
-include $(CPP_DEPS)
endif
ifneq ($(strip $(CXX_DEPS)),)
-include $(CXX_DEPS)
endif
ifneq ($(strip $(C_UPPER_DEPS)),)
-include $(C_UPPER_DEPS)
endif
endif

-include ../makefile.defs`enter code here`

# Add inputs and outputs from these tool invocations to the build variables 
AR += \
/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/arduino.ar \

ELF += \
test123.elf \

EEP += \
test123.eep \

FLASH_IMAGE += \
test123.hex \


# All Target
all: test123

# Tool invocations
test123: $(FLASH_IMAGE)
    @echo 'Building target: $@'
    @echo 'Printing size:'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-size" -A "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.hex"
    @echo 'Finished building target: $@'
    @echo ' '

/home/jonas/Dokumente/Studium/7.\ Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/arduino.ar: $(AR_OBJ)
    @echo 'Starting archiver'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-ar" rcs "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/arduino.ar"   $(AR_OBJ)
    @echo 'Finished building: $@'
    @echo ' '

test123.elf: $(LINK_OBJ) $(AR)
    @echo 'Starting combiner'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-gcc" -Os -Wl,--gc-sections -mmcu=atmega328p -o "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.elf"   $(LINK_OBJ) $(AR)  "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/arduino.ar" "-L/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release" -lm
    @echo 'Finished building: $@'
    @echo ' '

test123.eep: $(ELF)
    @echo 'Create eeprom image'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/arduino-1.5.2/hardware/tools/avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "/home/jonas/Dokumente/Studium/7. Semester/Projekt /Autopilotwc/trunk/Software/test123/Release/test123.elf" "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123    /Release/test123.eep"
    @echo 'Finished building: $@'
    @echo ' '

    test123.hex: $(EEP)
    @echo 'Create Flash image (ihex format)'
    "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk /Software/arduino-1.5.2/hardware/tools/avr/bin/avr-objcopy" -O ihex -R    .eeprom "/home/jonas/Dokumente/Studium/7. Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.elf" "/home/jonas/Dokumente/Studium/7.   Semester/Projekt/Autopilotwc/trunk/Software/test123/Release/test123.hex"
    @echo 'Finished building: $@'
    @echo ' '

    # Other Targets
    clean:
    -$(RM)      $(ELF)$(C++_DEPS)$(AR)$(C_DEPS)$(CC_DEPS)$(FLASH_IMAGE)$(AR_OBJ)$(CPP_DEPS)$(L    INK_OBJ)$(EEP)$(CXX_DEPS)$(C_UPPER_DEPS)$(SIZEDUMMY) test123
    -@echo ' '

    .PHONY: all clean dependents
    .SECONDARY:

    -include ../makefile.targets

非常感谢您的帮助。

Answer 1

您不能在 makefile 中正确使用带空格的路径。它不会起作用。

你逃离空间的尝试并没有如你所愿。

您通常也不应该使用这样的文件的完整路径。

这使得移动 makefile/目录(或在其他机器上使用它)变得不必要地困难。

只需使用相对于当前目录的路径。