我的盒子碰撞代码不工作。
bool checkCollide(int x, int y, int oWidth, int oHeight, int xTwo, int yTwo, int oTwoWidth, int oTwoHeight)
{
if (xTwo + oTwoWidth < x)
return false; // box 2 is left of box 1
if (x + oWidth < xTwo)
return false; // box 1 is left of box 2
if (xTwo > x + oWidth)
return false; // box 2 is right of box 1
if (x > xTwo + oTwoWidth)
return false; // box 1 is right of box 2
if (yTwo + oTwoHeight < y)
return false; // box 2 is up of box 1
if (y + oHeight < yTwo)
return false; // box 1 is up of box 2
if (yTwo > y + oHeight)
return false; // box 2 is down of box 1
if (y > yTwo + oTwoHeight)
return false; // box 1 is down of box 2
return true;
}
我的盒子中的一个明显越过了另一个,但是什么也没有发生。 由于某种原因,它似乎返回 false。我正在检查一个“矩形”是否超出了另一个“矩形”的范围,如果没有则返回 true。为什么它不起作用?
最佳答案
这是我的做法(我会提供一个 AABB 对象而不是槽)
bool checkCollide(int x, int y, int oWidth, int oHeight, int xTwo, int yTwo, int oTwoWidth, int oTwoHeight)
{
// AABB 1
int x1Min = x;
int x1Max = x+oWidth;
int y1Max = y+oHeight;
int y1Min = y;
// AABB 2
int x2Min = xTwo;
int x2Max = xTwo+oTwoWidth;
int y2Max = yTwo+oTwoHeight;
int y2Min = yTwo;
// Collision tests
if( x1Max < x2Min || x1Min > x2Max ) return false;
if( y1Max < y2Min || y1Min > y2Max ) return false;
return true;
}
事实上,您可以直接用值代替 x1Max 等,而不是使用临时变量。我添加它们是为了便于阅读。
bool checkCollide(int x, int y, int oWidth, int oHeight, int xTwo, int yTwo, int oTwoWidth, int oTwoHeight)
{
if( x+oWidth < xTwo || x > xTwo+oTwoWidth ) return false;
if( y+oHeight < yTwo || y > yTwo+oTwoHeight ) return false;
return true;
}
请注意,此功能仅适用于 2D 框,但它只需要多一 strip z 轴的测试线即可与 3D 兼容。
------------
现在让我们看一下您的代码并附上一些注释
bool checkCollide(int x, int y, int oWidth, int oHeight, int xTwo, int yTwo, int oTwoWidth, int oTwoHeight)
{
if (xTwo + oTwoWidth < x) //(1) if( x2Max < x1Min )
return false;
if (x + oWidth < xTwo) //(2) if( x1Max < x2Min )
return false;
if (xTwo > x + oWidth) //(3) if( x2Min > x1Max ) ==> if( x1Max < x2Min ) ==> (2)
return false;
if (x > xTwo + oTwoWidth) //(4) if( x1Min > x2Max ) ==> if( x2Max < x1Min ) ==> (1)
return false;
if (yTwo + oTwoHeight < y) //(5) if( y2Max < y1Min )
return false;
if (y + oHeight < yTwo) //(6) if( y1Max < y2Min )
return false;
if (yTwo > y + oHeight) //(7) if( y2Min > y1Max ) ==> if( y1Max < y2Min ) ==> (6)
return false;
if (y > yTwo + oTwoHeight) //(8) if( y1Min > y2Max ) ==> if( y2Max < y1Min ) ==> (5)
return false;
return true;
}
如您所见,一半的测试不是必需的。 考虑到 X 轴,您的第一个测试与第四个相同;你的第二个测试与第三个相同。
------------
但是,我无法找出当框重叠时您的函数不返回 true 的任何原因。它应该有效。
我测试了以下值
std::cout << checkCollide(5, 5, 2, 2, 0, 0, 3, 3) << std::endl; // false no collision
std::cout << checkCollide(5, 5, 2, 2, 4, 4, 3, 3) << std::endl; // true collision
它返回 false,如预期的那样返回 true。
关于c++ - 盒子碰撞代码,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/6083626/