我有一个 XBMC 盒子连接到我的电视上。此外,我还有 2 台 Foscam IP 摄像机,用于监控我的两个小女儿。
前阵子我觉得写几个脚本会很酷,这样当 Foscam 的一个警报触发时,我会在 XBMC 上收到一条通知以及来自相关 Foscam 相机的实时图像。有了这个,我可以一边看电视,一边密切关注 children 。
因此,我在 XBMC 盒子上运行了一个 shell 脚本,它每秒检查一次 Foscam 警报状态。如果触发警报,它会向 XBMC 发送命令以触发 XBMC 脚本,暂停检查 30 秒,然后恢复检查警报状态。 XBMC 脚本显示了一个 30 秒的通知,其中包含我的一个女儿的名字(取决于触发的相机)和一张可爱的照片,以及来自相关 Foscam 的实时快照,每半秒更新一次。
这一切都工作得很好,而且非常棒 :) 但是,上周我升级了 Foscam 的固件。新固件的唯一变化(在固件说明中提到)是将相机的HTTP
授权方法从basic
更改为digest
。从那时起,我的 XBMC 脚本就一直有问题。
首先,这是脚本的当前版本:
# Import the XBMC/XBMCGUI modules.
from requests.auth import HTTPDigestAuth
import xbmc, xbmcgui, xbmcvfs, xbmcaddon
import sys, os, requests, time
# Class to manage the notification image
class CamView(xbmcgui.WindowDialog):
urlpath = "/snapshot.cgi?resolution=16"
imagename = "snapshot.jpg"
def __init__(self, camname,camport,idx,username,password):
# Construct correct URL
self.baseurl = 'http://' + camname + 'cam:' + camport
# Cams use digest authentication
self.auth = HTTPDigestAuth(username, password)
# Set
path = xbmc.translatePath('special://profile/addon_data/%s' % xbmcaddon.Addon().getAddonInfo('id'))
if not xbmcvfs.exists(path):
xbmcvfs.mkdir(path)
self.imagefile = os.path.join(path, self.imagename)
# Message
self.msg = {
"1": camname.capitalize() + ' moved',
"3": camname.capitalize() + ' made a sound',
}.get(idx, camname.capitalize() + 'cam fired alarm')
# set the initial image before the window is shown
self.image = xbmcgui.ControlImage(870, 383, 380, 253, "")
self.addControl(self.image)
def update_image(self):
f = requests.get(self.baseurl+self.urlpath, auth=self.auth)
with open(self.imagefile, "wb") as local_file:
local_file.write(f.content)
self.image.setImage("")
self.image.setImage(self.imagefile)
def __enter__(self):
return self
def __exit__(self,type,value,traceback):
os.remove(self.imagefile)
def main():
for i in range(1,len(sys.argv)):
str,dummy,val = sys.argv[i].partition("=")
if str == "alarm_id": idx = val
if str == "cam_id" : camname = val
if str == "cam_port": camport = val
if str == "username": username = val
if str == "password": password = val
with CamView(camname,camport,idx,username,password) as viewer:
viewer.show()
start_time = time.time()
firstimage = True
while(time.time() - start_time <= 30):
viewer.update_image()
curr_time = round(time.time()-start_time, 0)
if firstimage:
firstimage = False
nowtime = time.strftime("%I:%M %p")
viewer.image.setAnimations([('conditional', 'effect=fade start=0 end=100 time=750 delay=125 condition=true'),
('conditional', 'effect=slide start=400,0 end=0,0 time=750 condition=true')])
xoptions = ("Notification(\"" + viewer.msg + "\", " + nowtime + ", 29500, special://masterprofile/addon_data/" +
xbmcaddon.Addon().getAddonInfo('id') + "/" + camname + ".png)")
xbmc.executebuiltin(xoptions)
elif curr_time == 30:
viewer.image.setAnimations([('conditional', 'effect=fade start=100 end=0 time=750 condition=true'),
('conditional', 'effect=slide start=0,0 end=400,0 time=750 condition=true')])
else:
viewer.image.setAnimations([('conditional', 'effect=fade start=100 end=100 time=0 condition=true')])
xbmc.sleep(500)
if __name__ == "__main__":
if xbmc.getInfoLabel("Window(10000).Property(foscamScriptRunning)") == "True":
xbmc.log('Script already running', level=xbmc.LOGERROR)
else:
xbmc.log('Foscam alarm triggered', level=xbmc.LOGNOTICE)
xbmcgui.Window(10000).setProperty("foscamScriptRunning", "True")
main()
xbmcgui.Window(10000).setProperty("foscamScriptRunning", "False")
原始脚本使用了 urllib
,我发现它不以任何方便的方式支持 digest
身份验证。所以我改成了urllib2
。这没有用,因为我的 XBMC 弹出窗口中的图像在第一张图像之后从未更新过。有时,甚至根本没有图像。
所以我做了一些挖掘,我很快发现使用 urllib2
和 Digest
身份验证获取快照花了 7 秒多一点! (使用旧固件,这花费了不到 0.1 秒)。考虑到这可能是图像未更新的原因,我将所有内容都更改为 requests
模块。分析表明,从相机获取一张快照现在大约需要 0.25 秒;恕我直言,仍然相当慢,但也许可以接受。但是,同样使用此方法,通知图像不会更新。
我通过远程 SSH 触发脚本,所以我可以检查 XBMC 日志等。我还检查了 snapshot.jpg
文件创建时的时间戳,它们似乎同意脚本触发时间和 requests
的 0.25 秒延迟。在 XBMC 脚本中,我将清除图像并将其设置为新快照的顺序更改为您能想到的所有可能的顺序,但没有成功。如果我在清除和重新设置图像之间设置延迟,我会看到闪烁的图像,表明一切正常。但是,它总是重新设置为完全相同的快照。
所以,我真的被困住了。我在这里忽略了什么?
最佳答案
它的值(value):
我最终“解决”了这个问题,方法是将每个单独的快照保存在一个唯一的名称下(根据时间生成的名称,带有微秒),然后删除所有这些单独的文件。
这暗示了 xbmcgui.ControlImage.setImage()
存在一些缓存问题,但我一直无法找到任何提及缓存的文档...
我在使用这种方法时遇到的一个问题是,如果您在显示通知时按 Esc
(因为在这种情况下所有 XBMC 控制都会丢失),图像不会总是清理得当。相对较小的问题,但它清楚地表明这是一个臭解决方案:)
关于python - XBMC 通知图像(来自网络摄像头)未更新,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/24238453/