到目前为止,我已经到了找到设备的阶段,现在我准备好使用 specification 中列出的设备协议(protocol)与 USB 通信了。在第 22 页。
我的机器上安装了 libusb,PyUSB 也安装了。
import usb.core
import usb.util
# find our device
dev = usb.core.find(idVendor=0x067b, idProduct=0x2303)
# was it found?
if dev is None:
raise ValueError('Device not found')
# b are bytes, w are words
reqType = ''
bReq = ''
wVal = ''
wIndex = ''
dev.ctrl_transfer(reqType, bReq, wVal, wIndex, [])
上面的例子试图使用控制传输,我认为这是协议(protocol)所描述的。
我只是想知道我的方向是否正确,或者我是否做错了根本性的事情。
设备已找到,只是我不确定的下一部分。
最佳答案
https://github.com/walac/pyusb/blob/master/docs/tutorial.rst中有一个例子亲爱的,跟我说话
>>> msg = 'test'
>>> assert dev.ctrl_transfer(0x40, CTRL_LOOPBACK_WRITE, 0, 0, msg) == len(msg)
>>> ret = dev.ctrl_transfer(0xC0, CTRL_LOOPBACK_READ, 0, 0, len(msg))
>>> sret = ''.join([chr(x) for x in ret])
>>> assert sret == msg
如果你想写入端点(批量传输等),你必须遵守 USB 树结构:-> configuration -> claim interface -> get endpoint
...
规范的第22页不是USB协议(protocol)是GNET协议(protocol)(我不知道)。关键是您不需要低级 USB 即可与设备通信。你可以在 linux 或Windows 中的一些模拟
关于python - 如何使用 PyUSB 与 USB 设备交互,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/44290837/