我正在尝试让“hello world”类型的程序在我的 Beagleboard-xm 版本上运行。 C,通过从程序集调用 C puts
函数。
到目前为止,我一直将其用作引用:http://wiki.osdev.org/ARM_Beagleboard
这是我到目前为止的内容,但没有输出。
你好.c
volatile unsigned int * const UART3DR = (unsigned int *)0x49020000;
void puts(const char *s) {
while(*s != '\0') {
*UART3DR = (unsigned int)(*s);
s++;
}
}
void hello() {
puts("Hello, Beagleboard!\n");
}
boot.asm
.global start
start:
ldr sp, =stack_bottom
bl hello
b .
linker.ld
ENTRY(start)
MEMORY
{
ram : ORIGIN = 0x80200000, LENGTH = 0x10000
}
SECTIONS
{
.hello : { hello.o(.text) } > ram
.text : { *(.text) } > ram
.data : { *(.data) } > ram
.bss : { *(.bss) } > ram
. = . + 0x5000; /* 4kB of stack memory */
stack_bottom = .;
}
生成文件
ARMGNU = arm-linux-gnueabi
AOPS = --warn --fatal-warnings
COPS = -Wall -Werror -O2 -nostdlib -nostartfiles -ffreestanding
boot.bin: boot.asm
$(ARMGNU)-as boot.asm -o boot.o
$(ARMGNU)-gcc-4.6 -c $(COPS) hello.c -o hello.o
$(ARMGNU)-ld -T linker.ld hello.o boot.o -o boot.elf
$(ARMGNU)-objdump -D boot.elf > boot.list
$(ARMGNU)-objcopy boot.elf -O srec boot.srec
$(ARMGNU)-objcopy boot.elf -O binary boot.bin
像这样只使用 asm 文件就可以了。
.equ UART3.BASE, 0x49020000
start:
ldr r0,=UART3.BASE
mov r1,#'c'
这里有一些 Beagleboard/minicom 相关信息:http://paste.ubuntu.com/829072/
有什么指点吗? :)
我也试过
void hello() {
*UART3DR = 'c';
}
我正在使用 minicom 并通过 ymodem 发送文件,然后我尝试运行它:
go 0x80200000
minicom 中的硬件和软件控制流已关闭。
最佳答案
这应该对你有用。这是我从很久以前挖出的一些代码,今晚没有在 beagleboard 上尝试它只是确保它编译了,它曾经工作过......
启动.s:
.code 32
.globl _start
_start:
bl main
hang: b hang
.globl PUT32
PUT32:
str r1,[r0]
bx lr
.globl GET32
GET32:
ldr r0,[r0]
bx lr
你好.c:
extern void PUT32 ( unsigned int, unsigned int );
extern unsigned int GET32 ( unsigned int );
void uart_send ( unsigned char x )
{
while((GET32(0x49020014)&0x20)==0x00) continue;
PUT32(0x49020000,x);
}
void hexstring ( unsigned int d )
{
//unsigned int ra;
unsigned int rb;
unsigned int rc;
rb=32;
while(1)
{
rb-=4;
rc=(d>>rb)&0xF;
if(rc>9) rc+=0x37; else rc+=0x30;
uart_send(rc);
if(rb==0) break;
}
uart_send(0x0D);
uart_send(0x0A);
}
int main ( void )
{
hexstring(0x12345678);
return(0);
}
memmap(链接描述文件):
MEMORY
{
ram : ORIGIN = 0x82000000, LENGTH = 256K
}
SECTIONS
{
ROM : { startup.o } > ram
}
生成文件:
CROSS_COMPILE = arm-none-eabi
AOPS = --warn --fatal-warnings
COPS = -Wall -Werror -O2 -nostdlib -nostartfiles -ffreestanding
all : hello.bin
hello.bin : startup.o hello.o memmap
$(CROSS_COMPILE)-ld startup.o hello.o -T memmap -o hello.elf
$(CROSS_COMPILE)-objdump -D hello.elf > hello.list
$(CROSS_COMPILE)-objcopy hello.elf -O binary hello.bin
startup.o : startup.s
$(CROSS_COMPILE)-as $(AOPS) startup.s -o startup.o
hello.o : hello.c
$(CROSS_COMPILE)-gcc -c $(COPS) hello.c -o hello.o
clean :
rm -f *.o
rm -f *.elf
rm -f *.bin
rm -f *.list
看起来我只是将堆栈指针留在了引导加载程序所在的位置。同样,与您一样,假设引导加载程序已初始化串行端口。
我假设你有串行端口访问工作,你看到 uboot 并且你能够键入命令以将此程序(xmodem,或其他)下载到板 ram 中?如果你不能这样做,那么可能是你没有正确连接到串口。 beagleboards 的串行端口很麻烦,可能需要自己制作电缆。
关于c - Hello World ,裸机 Beagleboard,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/9142951/