由于客户端网络连接不佳,我将我的 Yocto 项目的 tar 文件复制给了客户。
但是,客户在解压 Yocto 项目并运行 bitbake 命令在他们的 PC 上构建项目时遇到了问题。
客户遇到以下构建代码错误:
s32v@s32v-vm:~/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release$ bitbake fsl-image-s32v2xx
ERROR: OE-core's config sanity checker detected a potential misconfiguration.
Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
Error, TMPDIR has changed location. You need to either move it back to /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp or rebuild
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
我编辑了/build_s32v234evb_release/tmp/saved_tmpdir 文件来重新定位 tmp 目录,这个错误已经过去了。
但是,我在build Kernel的时候又报错了,貌似目录参数还是不对...(只build U-Boot没有报错。)
s32v@s32v-vm:~/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release$ bitbake fsl-image-s32v2xx
Loading cache: 100% |########################################################################################################################################################################| ETA: 00:00:00
Loaded 2462 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.26.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "aarch64-fsl-linux"
MACHINE = "s32v234evb"
DISTRO = "fsl-networking"
DISTRO_VERSION = "1.8"
TUNE_FEATURES = "aarch64"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "(nobranch):03b0fbcf6b3b5cd16ae16738fbaabd1c6bf98536"
meta-fsl-arm = "(nobranch):c9f259a4bf8472dfa3ff75f1c3fcbe5e0ded7aaf"
meta-fsl-networking = "(nobranch):b8ff02a8d508464a16c84e1d13c155f45aa98cbe"
meta-fsl-toolchain = "(nobranch):0a235c4bcd4057608ee60b8c898eec9509632b95"
meta-virtualization = "(nobranch):0277cbcb47db4239d0a4aa3b37c5c6a705070951"
meta-fsl-s32v = "<unknown>:<unknown>"
meta-oe
meta-networking
meta-python
meta-webserver
meta-filesystems = "(nobranch):c841231b9f327d2d06d19d2ba1324dd86b83617c"
meta-linaro
meta-aarch64
meta-linaro-toolchain = "(nobranch):5075a82bd510d19617803fb16da2375605225cbb"
NOTE: Preparing RunQueue
WARNING: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-kernel/linux/linux-s32v2xx_4.1.26.bb.do_compile is tainted from a forced run
WARNING: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-bsp/u-boot/u-boot-s32v2xx_2016.01.bb.do_compile is tainted from a forced run
WARNING: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-bsp/u-boot/u-boot-s32v2xx_2016.01.bb.do_deploy is tainted from a forced run
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_compile (log file is located at /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/s32v234evb-fsl-linux/linux-s32v2xx/4.1.26-r0/temp/log.do_compile.17853)
ERROR: Logfile of failure stored in: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/s32v234evb-fsl-linux/linux-s32v2xx/4.1.26-r0/temp/log.do_compile.17853
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 4 Image CC=aarch64-fsl-linux-gcc --sysroot=/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/s32v234evb LD=aarch64-fsl-linux-ld.bfd --sysroot=/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/s32v234evb
| make: *** /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work-shared/s32v234evb/kernel-source: No such file or directory. Stop.
| make: *** [__sub-make] Error 2
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/s32v234evb-fsl-linux/linux-s32v2xx/4.1.26-r0/temp/log.do_compile.17853)
ERROR: Task 76 (/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-kernel/linux/linux-s32v2xx_4.1.26.bb, do_compile) failed with exit code '1'
ERROR: Function failed: do_compile (log file is located at /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/temp/log.do_compile.17854)
ERROR: Logfile of failure stored in: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/temp/log.do_compile.17854
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 4
| LINK tests/qemu-iotests/socket_scm_helper
| GEN qemu-doc.html
| GEN qemu.1
| CC qga/commands.o
| cc1: warning: /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/x86_64-linux/usr/include/pixman-1: No such file or directory [enabled by default]
| cc1: warning: /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/x86_64-linux/usr/include/glib-2.0: No such file or directory [enabled by default]
| cc1: warning: /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/x86_64-linux/usr/lib/glib-2.0/include: No such file or directory [enabled by default]
| /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/qemu-2.2.0/qga/commands.c:13:18: fatal error: glib.h: No such file or directory
| #include <glib.h>
| ^
| compilation terminated.
| make: *** [qga/commands.o] Error 1
| make: *** Waiting for unfinished jobs....
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/temp/log.do_compile.17854)
ERROR: Task 2849 (virtual:native:/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/poky/meta/recipes-devtools/qemu/qemu_2.2.0.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1504 tasks of which 1502 didn't need to be rerun and 2 failed.
Waiting for 0 running tasks to finish:
Summary: 2 tasks failed:
/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-kernel/linux/linux-s32v2xx_4.1.26.bb, do_compile
virtual:native:/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/poky/meta/recipes-devtools/qemu/qemu_2.2.0.bb, do_compile
Summary: There were 3 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
我的问题是:
- 是否可以通过 tar 文件将 Yocot 项目复制到另一台 PC?
- 除了 saved_tmpdir 文件,我还需要编辑哪些配置/初始文件?
- Yocto Project 定义“kernel-source”目录的文件是什么?
最好的问候, 郭文贵
最佳答案
将tar工程复制到另一台PC时,会修改两个文件:
- build/conf/bblayers.conf
- 构建/tmp/saved_tmpdir
关于linux - 通过 tar 将 Yocto Project 复制到其他 PC,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/50097449/