我有一个 root 的 xperia Z 手机。 我想发送 USSD 命令并获取答案。
我的第一个想法是通过 adb shell 接口(interface)通过良好的接口(interface)发送 AT 命令。
我列出了所有接口(interface):
/dev/tty /dev/tty 5 0 system:/dev/tty
/dev/console /dev/console 5 1 system:console
/dev/ptmx /dev/ptmx 5 2 system
/dev/vc/0 /dev/vc/0 4 0 system:vtmaster
rfcomm /dev/rfcomm 216 0-255 serial
usbserial /dev/ttyUSB 188 0-253 serial
msm_serial_hsl /dev/ttyHSL 244 0-3 serial
msm_serial_hs /dev/ttyHS 245 0-255 serial
pty_slave /dev/pts 136 0-1048575 pty:slave
pty_master /dev/ptm 128 0-1048575 pty:master
smd_tty_driver /dev/smd 251 0-36 serial
unknown /dev/tty 4 1-63 console
我找不到合适的界面。 我尝试使用此命令集:
root@android:/tmp/tst # tail -f /dev/ttyHSL1 &
root@android:/tmp/tst # echo -e "AT\r" > /dev/ttyHSL1
但我没有得到答复。
知道如何找到好的端口吗？
编辑1: 根据 Alex P 的要求。
root@android:/ # getprop | grep -i ril
[gsm.version.ril-impl]: [Qualcomm RIL 1.0]
[init.svc.ril-daemon]: [running]
[init.svc.ril-qmi]: [stopped]
[persist.rild.nitz_long_ons_0]: []
[persist.rild.nitz_long_ons_1]: []
[persist.rild.nitz_long_ons_2]: []
[persist.rild.nitz_long_ons_3]: []
[persist.rild.nitz_plmn]: []
[persist.rild.nitz_short_ons_0]: []
[persist.rild.nitz_short_ons_1]: []
[persist.rild.nitz_short_ons_2]: []
[persist.rild.nitz_short_ons_3]: []
[persist.ro.ril.sms_sync_sending]: [1]
[ril.cat.first.start]: [false]
[ril.ecclist]: [911,112]
[ril.icctype]: [2]
[ril.subscription.types]: [NV,RUIM]
[rild.libargs]: [-d /dev/smd0]
[rild.libpath]: [/system/lib/libril-qc-qmi-1.so]
[ro.ril.svdo]: [false]
[ro.ril.svlte1x]: [false]
[ro.ril.transmitpower]: [true]
goot@android:/ # grep -i ril /init*rc /init*sh
/init.qcom.rc: onrestart /system/bin/log -t RIL-ATFWD -p w "ATFWD daemon restarted"
/init.qcom.rc:service ril-daemon1 /system/bin/rild -c 1
/init.qcom.rc: socket rild1 stream 660 root radio
/init.qcom.rc: socket rild-debug1 stream 660 radio system
/init.rc:service ril-daemon /system/bin/rild
/init.rc: socket rild stream 660 root radio
/init.rc: socket rild-debug stream 660 radio system
/init.target.rc:service ril-qmi /system/bin/sh /init.qcom.ril.sh
/init.qcom.class_main.sh:# start ril-daemon only for targets on which radio is present
/init.qcom.class_main.sh:multirild=`getprop ro.multi.rild`
/init.qcom.class_main.sh: setprop ro.radio.noril yes
/init.qcom.class_main.sh: stop ril-daemon
/init.qcom.class_main.sh: setprop ro.multi.rild true
/init.qcom.class_main.sh: stop ril-daemon
/init.qcom.class_main.sh: start ril-daemon
/init.qcom.class_main.sh: start ril-daemon1
/init.qcom.class_main.sh: case "$multirild" in
/init.qcom.class_main.sh: start ril-daemon1
/init.qcom.ril.sh:# start two rild when dsds property enabled
/init.qcom.ril.sh: setprop ro.multi.rild true
/init.qcom.ril.sh: stop ril-daemon
/init.qcom.ril.sh: start ril-daemon
/init.qcom.ril.sh: start ril-daemon1
root@android:/ # busybox netstat -lpnx | grep -i ril
unix 2 [ ACC ] STREAM LISTENING 7312 277/rild /dev/socket/rild-debug
unix 2 [ ACC ] STREAM LISTENING 7314 277/rild /dev/socket/rild
编辑2:
如我所见/dev/smd0，我列出了所有的smd接口(interface):
root@android:/ # ls -l /dev/smd*
ls -l /dev/smd*
crw------- root root 251, 1 2013-10-01 21:53 smd1
crw------- root root 251, 11 1970-05-31 18:07 smd11
crw-rw---- bluetooth bluetooth 251, 2 1970-05-31 18:07 smd2
crw------- root root 251, 21 1970-05-31 18:07 smd21
crw------- root root 250, 8 1970-05-31 18:07 smd22
crw------- root root 251, 27 1970-05-31 18:07 smd27
crw-rw---- bluetooth bluetooth 251, 3 2013-10-01 17:45 smd3
crw------- root root 251, 36 1970-05-31 18:07 smd36
crw-rw---- system system 251, 4 1970-05-31 18:07 smd4
crw------- root root 251, 5 1970-05-31 18:07 smd5
crw------- root root 251, 6 1970-05-31 18:07 smd6
crw-rw---- bluetooth bluetooth 251, 7 1970-05-31 18:07 smd7
crw-r----- radio radio 250, 22 1970-05-31 18:07 smd_cxm_qmi
crw------- root root 250, 23 1970-05-31 18:07 smd_pkt_loopback
crw------- root root 250, 21 1970-05-31 18:07 smd_sns_adsp
crw------- root root 250, 18 1970-05-31 18:07 smd_sns_dsps
crw------- root root 250, 9 1970-05-31 18:07 smdcnt_rev0
crw------- root root 250, 10 1970-05-31 18:07 smdcnt_rev1
crw------- root root 250, 11 1970-05-31 18:07 smdcnt_rev2
crw------- root root 250, 12 1970-05-31 18:07 smdcnt_rev3
crw------- root root 250, 13 1970-05-31 18:07 smdcnt_rev4
crw------- root root 250, 14 1970-05-31 18:07 smdcnt_rev5
crw------- root root 250, 15 1970-05-31 18:07 smdcnt_rev6
crw------- root root 250, 16 1970-05-31 18:07 smdcnt_rev7
crw------- root root 250, 17 1970-05-31 18:07 smdcnt_rev8
crw-r----- radio radio 250, 0 1970-05-31 18:07 smdcntl0
crw-r----- radio radio 250, 1 1970-05-31 18:07 smdcntl1
crw-r----- radio radio 250, 2 1970-05-31 18:07 smdcntl2
crw-r----- radio radio 250, 3 1970-05-31 18:07 smdcntl3
crw-r----- radio radio 250, 4 1970-05-31 18:07 smdcntl4
crw-r----- radio radio 250, 5 1970-05-31 18:07 smdcntl5
crw-r----- radio radio 250, 6 1970-05-31 18:07 smdcntl6
crw-r----- radio radio 250, 7 1970-05-31 18:07 smdcntl7
crw------- root root 250, 20 1970-05-31 18:07 smdcntl8
我没有安装/dev/smd0 接口(interface)
编辑3:
我尝试了套接字解决方案:
new-host:platform-tools julio$ ./adb forward tcp:8080 localfilesystem:/dev/socket/rild-debug
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
new-host:platform-tools julio$
>>> MaSocket = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
>>> MaSocket.connect(('127.0.0.1',8080))
>>> MaSocket.send('AT\r\n')
4
>>> print MaSocket.recv(1)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
socket.error: [Errno 54] Connection reset by peer
>>> print MaSocket.recv(1)
>>>
最佳答案
我有同样的问题:
您可以使用/dev/smd7、/dev/sdm8、/dev/smd11
例如:
echo "AT\r" | busybox microcom -t 500 /dev/smd11
关于android - 在 root 的 Xperia Z android 设备上发送 AT 命令，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/19121528/